ANSI B16.5 A182 F304 Plate Flange DN80 CL150
Short Description
Model No.: ANSI-B16.5-A182-F304-Plate-Flange-DN80-CL150
China Plate Flange Manufacturer www.steeljrv.com offers ANSI B16.5 A182 F304 Plate Flange, DN80, CL150.
Tags:
Key Specifications / Features
Type: 304 Plate Flange
Material: 304
Standard: ANSI B16.5
Pressure: CL150 (150#)
Size: 3″ (DN80)
|
Chemical Composition and Mechanical Property for 304/304L |
|||||||||||
|
Steel Grade |
Chemical Composition |
Mechanical Performance |
|||||||||
|
C(Max) |
Si(Max) |
Mn(Max) |
P(Max) |
S(Max) |
Ni |
Cr |
N |
Mo |
Tensile Strength |
Yield Strength |
|
|
Mpa |
Mpa |
||||||||||
|
304 |
0.08 |
0.75 |
2.00 |
0.045 |
0.03 |
8.0–10.5 |
18.0–20.0 |
0.1 |
/ |
515 |
205 |
|
304L |
0.03 |
0.75 |
2.00 |
0.045 |
0.03 |
8.0–12.0 |
18.0–20.0 |
0.1 |
/ |
485 |
170 |
| ANSI, ASME, ASA, B16.5 150lb/sq.in. Plate Ring Flange RF | |||||||||
| ø | D | b | g | m | J | k | Holes | l | Kg. |
| 1/2″ | 88,9 | 11,1 | 34,9 | 30,2 | 22,3 | 60,3 | 4 | 15,9 | 0,400 |
| 3/4″ | 98,4 | 12,7 | 42,9 | 38,1 | 27,7 | 69,8 | 4 | 15,9 | 0,700 |
| 1″ | 107,9 | 14,3 | 50,8 | 49,2 | 34,5 | 79,4 | 4 | 15,9 | 0,800 |
| 1 1/4″ | 117,5 | 15,9 | 63,5 | 58,8 | 43,2 | 88,9 | 4 | 15,9 | 1,100 |
| 1 1/2″ | 127,0 | 17,5 | 73,0 | 65,1 | 49,5 | 98,4 | 4 | 15,9 | 1,400 |
| 2″ | 152,4 | 19,0 | 92,1 | 77,8 | 62,0 | 120,6 | 4 | 19,0 | 2,200 |
| 2 1/2″ | 177,8 | 22,2 | 104,8 | 90,5 | 74,7 | 139,7 | 4 | 19,0 | 3,600 |
| 3″ | 190,5 | 23,8 | 127,0 | 107,9 | 90,7 | 152,4 | 4 | 19,0 | 4,100 |
| 3 1/2″ | 215,9 | 23,8 | 139,7 | 122,2 | 103,4 | 177,8 | 8 | 19,0 | 5,200 |
| 4″ | 228,6 | 23,8 | 157,2 | 134,9 | 116,1 | 190,5 | 8 | 19,0 | 5,600 |
| 5″ | 254,0 | 23,8 | 185,7 | 163,6 | 143,8 | 215,9 | 8 | 22,2 | 6,300 |
| 6″ | 279,4 | 25,4 | 215,9 | 192,1 | 170,7 | 241,3 | 8 | 22,2 | 7,500 |
| 8″ | 342,9 | 28,6 | 269,9 | 246,1 | 221,5 | 298,4 | 8 | 22,2 | 12,600 |
| 10″ | 406,4 | 30,2 | 323,8 | 304,8 | 276,3 | 361,9 | 12 | 25,4 | 18,500 |
| 12″ | 482,6 | 31,7 | 381,0 | 365,1 | 327,1 | 431,8 | 12 | 25,5 | 28,000 |
| 14″ | 533,4 | 34,9 | 412,7 | 400,0 | 359,1 | 476,2 | 12 | 28,6 | 36,000 |
| 16″ | 596,9 | 36,5 | 469,9 | 457,2 | 410,5 | 539,7 | 16 | 28,6 | 46,000 |
| 18″ | 635,0 | 39,7 | 533,4 | 504,8 | 461,8 | 577,8 | 16 | 31,7 | 50,000 |
| 20″ | 698,5 | 42,9 | 584,2 | 558,8 | 513,1 | 635,0 | 20 | 31,7 | 64,000 |
| 22″ | 749,3 | 46,0 | 641,2 | 609,6 | 564,4 | 692,1 | 20 | 34,9 | 72,000 |
| 24″ | 812,8 | 47,6 | 692,1 | 663,6 | 615,9 | 749,3 | 20 | 34,9 | 89,000 |
|
NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option. |
English 
Български 
Čeština 
Deutsch 
Ελληνικά 
Español 
Français 
Bahasa Indonesia 
Italiano 
日本語 
한국어 
Lietuvių kalba 
Latviešu valoda 
Nederlands 
Polski 
Português 
Română 
Русский 
Slovenčina 
Slovenščina 
Svenska 
Türkçe 
Українська 
繁體中文 
Suomi 
Dansk 
Eesti 
Magyar