ASME B16.5 A182 304 SORF Flange 3 Inch 150#

Chemical Composition and Mechanical Property for 304/304L
Steel Grade	Chemical Composition									Mechanical Performance
	C(Max)	Si(Max)	Mn(Max)	P(Max)	S(Max)	Ni	Cr	N	Mo	Tensile Strength (Min)	Yield Strength (Min)
										Mpa	Mpa
304	0.08	0.75	2.00	0.045	0.03	8.0–10.5	18.0–20.0	0.1	/	515	205
304L	0.03	0.75	2.00	0.045	0.03	8.0–12.0	18.0–20.0	0.1	/	485	170

Flange Dimensions & Approximate Masses

ANSI, ASME, ASA, B16.5 150lb/sq.in. SLIP ON FLANGE RF / FF
ø	D	b	g	m	J	h	k	Holes	l	Kg.
1/2″	88,9	11,1	34,9	30,2	22,3	15,9	60,3	4	15,9	0,400
3/4″	98,4	12,7	42,9	38,1	27,7	15,9	69,8	4	15,9	0,700
1″	107,9	14,3	50,8	49,2	34,5	17,5	79,4	4	15,9	0,800
1 1/4″	117,5	15,9	63,5	58,8	43,2	20,6	88,9	4	15,9	1,100
1 1/2″	127,0	17,5	73,0	65,1	49,5	22,2	98,4	4	15,9	1,400
2″	152,4	19,0	92,1	77,8	62,0	25,4	120,6	4	19,0	2,200
2 1/2″	177,8	22,2	104,8	90,5	74,7	28,6	139,7	4	19,0	3,600
3″	190,5	23,8	127,0	107,9	90,7	30,2	152,4	4	19,0	4,100
3 1/2″	215,9	23,8	139,7	122,2	103,4	31,7	177,8	8	19,0	5,200
4″	228,6	23,8	157,2	134,9	116,1	33,3	190,5	8	19,0	5,600
5″	254,0	23,8	185,7	163,6	143,8	36,5	215,9	8	22,2	6,300
6″	279,4	25,4	215,9	192,1	170,7	39,7	241,3	8	22,2	7,500
8″	342,9	28,6	269,9	246,1	221,5	44,4	298,4	8	22,2	12,600
10″	406,4	30,2	323,8	304,8	276,3	49,2	361,9	12	25,4	18,500
12″	482,6	31,7	381,0	365,1	327,1	55,6	431,8	12	25,5	28,000
14″	533,4	34,9	412,7	400,0	359,1	57,1	476,2	12	28,6	36,000
16″	596,9	36,5	469,9	457,2	410,5	63,5	539,7	16	28,6	46,000
18″	635,0	39,7	533,4	504,8	461,8	68,3	577,8	16	31,7	50,000
20″	698,5	42,9	584,2	558,8	513,1	73,0	635,0	20	31,7	64,000
22″	749,3	46,0	641,2	609,6	564,4	79,4	692,1	20	34,9	72,000
24″	812,8	47,6	692,1	663,6	615,9	82,5	749,3	20	34,9	89,000

NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

<br>

+86-18267732328

[email protected]

ASME B16.5 A182 304 SORF Flange 3 Inch 150#

Short Description

Key Specifications / Features

Request a quote

Products Related to ASME B16.5 A182 304 SORF Flange 3 Inch 150#

Production and application of JFE hot rolled chromium series stainless steel s……

ASME B16.5 A182 UNS S30403 WNRF Flange 3″ SCH40S 150#

Classification of flanges

ASME B16.5 ASTM A105 SORF Flange DN500 Class150

Non-standard ASTM A240 F53 Ring Flange FF 324mm X 260mm X 65mm

ASME B16.5 ASTM B564 Alloy 825 WNRF Flange 3 Inch SCH40 150#

ASME B16.5 ASTM B564 Hastelloy C276 Slip-on Flange Raised Face 4 Inch 150#

Non-standard ASTM A240 F53 Plate Ring Flange RF 381mm X 170mm X 45mm

Non-standard ASME B16.5 A182 F53 WNRF Flange 6″ Sch80 300# RF=4MM