ASME B16.5 ASTM B564 Nickel 200/201 WNRF Flange 3 Inch SCH40 150#

Type: Nickel 200/201 WNRF Flange
Material: Nickel 200 (UNS N02200)/Nickel 201 (UNS N02201)
Pressure: 150#
Size: 3″ (DN80)
Standard: ASME B16.5
Ends: RF
WT: SCH40

Nickel 200-201 Flanges Equivalent Grades

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Nickel 200	N02200	2.4066	N-100M	Ni 99.2	NW 2200	NA 11	НП-2
Nickel 201	N02201	2.4068	–	LC-Ni 99	NW 2201	NA 11	НП-2

Nickel 200/201 Flanges Chemical Composition

Grade	Ni	Fe	Cu	C	Mn	S	Si
200	99.0 min	0.40	0.25	0.15	0.35	0.01	0.35
201	99.0 min	0.40	0.25	0.02	0.35	0.01	0.35

Nickel 200-201 Flanges Mechanical Properties

Grade	Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
200-201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 21500 , MPa – 148	Psi – 67000 , MPa – 462	45 %

Flange Dimensions & Approximate Masses

ANSI, ASME, ASA, B16.5 150lb/sq.in. WELDING NECK FLANGE RF
ø	D	b	g	m	a	J*	h	k	Holes	l	Kg.
1/2″	88,9	11,1	34,9	30,2	21,3	15,7	47,6	60,3	4	15,9	0,500
3/4″	98,4	12,7	42,9	38,1	26,7	20,8	52,4	69,8	4	15,9	0,700
1″	107,9	14,3	50,8	49,2	33,5	26,7	55,6	79,4	4	15,9	1,100
1 1/4″	117,5	15,9	63,5	58,8	42,2	35,1	57,1	88,9	4	15,9	1,500
1 1/2″	127,0	17,5	73,0	65,1	48,3	40,9	61,9	98,4	4	15,9	1,800
2″	152,4	19,0	92,1	77,8	60,3	52,6	63,5	120,6	4	19,0	2,700
2 1/2″	177,8	22,2	104,8	90,5	73,1	62,7	69,8	139,7	4	19,0	4,400
3″	190,5	23,8	127,0	107,9	88,9	78,0	69,8	152,4	4	19,0	5,200
3 1/2″	215,9	23,8	139,7	122,2	101,6	90,2	71,4	177,8	8	19,0	6,400
4″	228,6	23,8	157,2	134,9	114,3	102,4	76,2	190,5	8	19,0	7,500
5″	254,0	23,8	185,7	163,5	141,2	128,3	88,9	215,9	8	22,2	9,200
6″	279,4	25,4	215,9	192,1	168,4	154,2	88,9	241,3	8	22,2	11,000
8″	342,9	28,6	269,9	246,1	219,1	202,7	101,6	298,4	8	22,2	18,300
10″	406,4	30,2	323,8	304,8	273,0	254,5	101,6	361,9	12	25,4	25,000
12″	482,6	31,7	381,0	365,1	323,8	304,8	114,3	431,8	12	25,4	39,000
14″	533,4	34,9	412,7	400,0	355,6	336,5	127,0	476,2	12	28,6	51,000
16″	596,9	36,5	469,9	457,2	406,4	387,3	127,0	539,7	16	28,6	60,000
18″	635,0	39,7	533,4	504,8	457,2	438,1	139,7	577,8	16	31,7	71,000
20″	698,5	42,9	584,2	558,8	508,0	488,9	144,5	635,0	20	31,7	88,000
22″	749,3	46,0	641,2	609,6	558,8	539,7	149,2	692,1	20	34,9	102,000
24″	812,8	47,6	692,1	663,6	609,6	590,5	152,4	749,3	20	34,9	119,000
*	The data “J” corresponds to the STD schedule

NOTE:

1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).

2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.

3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.

4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).

5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

6. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS.

China Weld Neck Flange Manufacturer www.steeljrv.com offers ASME B16.5 ASTM B564 Nickel 200/201 WNRF Flange, 3 Inch, SCH40, 150#.

<br>