ASTM B551/B551M-2012 UNS R60702 Zirconium Plate

Type: Zirconium Plate

Standard: ASTM B551/B551M-2012
Size: 2200 X 1100 X 1.0 MM
Material: UNS R60702 (Zirconium 702/Zr 702)
Manufacture Method: Cold Rolled
Surface Treatment: 2B Finish

Zirconium & zirconium alloy strips, sheets, and plates shall be manufactured to ASTM B551. There are five grades available:

• UNS R60700: low oxygen zirconium;
• UNS R60702: unalloyed zirconium;
• UNS R60704: zirconium-tin;
• UNS R60705: zirconium-niobium;
• UNS R60706: zirconium-niobium.

Definitions of Zirconium & Zirconium Alloy Strip, Sheet & Plate

• Strip: a flat product, may be supplied in coil, less than 6 inch [150 mm] in width and from 0.005 inch [0.13 mm] to 0.188 inch [4.8 mm] in thickness.
• Sheet: a flat product 6 inch [150 mm] or more in width and from 0.005 inch [0.13 mm] to 0.188 inch [4.8 mm] in thickness.
• Plate: a flat product more than 0.125 inch [3.2 mm] in thickness.

Materials, Manufacture, Condition and Finish

The zirconium & zirconium alloy shall be made from ingots that are produced by vacuum or plasma arc melting, vacuum electron-beam melting, a combination of these three methods or other melting processes conventionally used for reactive metals. All processes to be done in furnaces usually used for reactive metals. The Zr or Zr alloy strip, sheet, and plate can be either hot rolled or cold rolled. Usually they shall be supplied in the recrystallized annealed condition unless otherwise specified. The finishes for hot rolled material can be designated as: not descaled, descaled, descaled and pickled, as-ground. The finishes for cold rolled material can be designated as: bright, Ground 32 μinch, pickled.

Chemical Composition of Zr & Zr Alloy Strip, Sheet & Plate

Element	ASTM B551 Grade
	R60700	R60702	R60704	R60705	R60706
Zirconium	≥99.2	≥99.2	≥97.5	≥95.5	≥95.5
Hafnium	≤4.5	≤4.5	≤4.5	≤4.5	≤4.5
Fe+Cr	≤0.2	≤0.2	0.2~0.4	≤0.2	≤0.2
Tin	–	–	1.0~2.0	–	–
Hydrogen	≤0.005	≤0.005	≤0.005	≤0.005	≤0.005
Nitrogen	≤0.025	≤0.025	≤0.025	≤0.025	≤0.025
Carbon	≤0.05	≤0.05	≤0.05	≤0.05	≤0.05
Niobium	–	–	–	2.0~3.0	2.0~3.0
Oxygen	≤0.10	≤0.16	≤0.18	≤0.18	≤0.16

*All values shall be in weight percentage unit.

Mechanical Properties of Zr & Zr Alloy Strip, Sheet & Plate

ASTM B551	Tensile Strength		Yield Strength		Elongation	Bend Test
Grade	ksi	MPa	ksi	MPa	min. %	*T
R60700	≤55	≤380	≤44	≤305	20	5T
R60702	≥55	≥380	≥30	≥205	16	5T
R60704	≥60	≥415	≥35	≥240	14	5T
R60705	≥80	≥550	≥55	≥380	16	3T
R60706	≥74	≥510	≥50	≥345	14	2.5T

*T = the thickness of the bend test specimen. Bend tests are not applicable to material over 0.187″ [4.8 mm] in thickness.

China Zirconium Plate Manufacturer www.steeljrv.com offers ASTM B551/B551M-2012 UNS R60702 Zirconium Plate.