British Standards for Pipelines (BS pipe standards)

20211002025828 46382 - British Standards for Pipelines (BS pipe standards)

British Standards for Pipelines (BS pipe standards)

Number Chinese name English name
BS 1042-1.4-1992 封闭管道内液体流量测量.第1部分:压差器件.第4节:第1和2节规定器件使用指南 Measurement of fluid flow in closed conduits – Pressure differential devices – Guide to the use of devices specified in Sections 1.1 and 1.2
BS 1042-2.1-1983 封闭管道内液体流量测量.第2部分:速度范围法.第1节:皮托静压管法 Measurement of fluid flow in closed conduits – Velocity area methods – Method using Pitot static tubes
BS 1042-2.2-1983 封闭管道内液体流量测量.第2部分:速度范围法.第2节:管道横截面某一点的流速测量方法 Measurement of fluid flow in closed conduits – Velocity area methods – Method of measurement of velocity at one point of a conduit of circular cross section
BS 1042-2.3-1984 封闭管道内液体流量测量.第2部分:速度范围法.第3节:用流量计或皮托静压管在圆形管道中涡流或不平衡流动条件 Measurement of fluid flow in closed conduits – Velocity area methods – Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
BS 1042-2.4-1989 封闭管道内液体流量测量.第2部分:速度范围法.第4节:正常流动条件下利用全流动导管中的流量计测量清洁水流量 Measurement of fluid flow in closed conduits – Velocity area methods – Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
BS 1306-1975 铜与铜合金承压管道系统规范 Specification for copper and copper alloy pressure piping systems
BS 1553-1-1977 一般工程用图形符号规范.第1部分:管道系统与装置 Specification for graphical symbols for general engineering – Piping systems and plant
BS 1566-2-1984 家用铜制间接热水罐.单管道的间接热水罐规范 Copper indirect cylinders for domestic purposes – Specification for single feed indirect cylinders
BS 2598-4-1980 玻璃器皿、管道与接头.第4部分:玻璃器皿零件规范 Glass plant, pipeline and fittings – Specification for glass plant components
BS 2633-1987 输送流体用铁素体钢管道工程的一级电弧焊规范 Specification for Class I arc welding of ferritic steel pipework for carrying fluids
BS 2782-11 Method 1150B-1998 塑料试验方法.第11部分:热塑管,接头和阀门.塑料管道和配件.试验方法1150D:对接熔融法聚乙烯(PE)管/管或管道 Methods of testing plastics – Thermoplastics pipes, fittings and valves – Plastics pipes and fittings – Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
BS 2971-1991 输送流体用碳钢管道二级电弧焊规范 Specification for class II arc welding of carbon steel pipework for carrying fluids
BS 2M 53-1997 飞机.液压系统.管道和管接头热冲击试验 Aircraft – Fluid systems – Thermal shock testing of piping and fittings
BS 3680-11A-1992 明渠流量测量.第11部分:封闭管道中自由表面流量.第11A节:测量方法 Measurement of liquid flow in open channels – Free surface flow in closed conduits – Methods of measurement
BS 3680-11B-1992 明渠流量测量.第11部分:封闭管道中自由表面流量.第11B节:测量设备安装和性能规范 Measurement of liquid flow in open channels – Free surface flow in closed conduits – Specification for performance and installation of equipment for measurement of free surface flow in closed conduits
BS 3M 60-1998 液压系统24度锥形可分管道接头.通用规范 Separable tube fittings for fluid systems, 24 ° cone – General specification
BS 4508-1-1986 绝热地下管道.第1部分:有气隙的外加钢套管系统规范 Thermally insulated underground pipelines – Specification for steel cased systems with air gap
BS 4508-4-1977 绝热地下管道.无气隙的外套管系统专门试验及检验要求 Thermally insulated underground pipelines – Specific testing and inspection requirements for cased systems without air gap
BS 4515-1-2004 陆地和近海钢管道焊接规范.碳及碳锰钢管 Specification for welding of steel pipelines on land and offshore – Carbon and carbon manganese steel pipelines
BS 4515-2-1999 陆地和近海铺设的钢管焊接规范.双联法不锈钢管道 Specification for welding of steel pipelines on land and offshore – Duplex stainless steel pipelines
BS 4678-1-1971 电缆管道.第1部分:钢制地表管道规范 Cable trunking – Steel surface trunking
BS 4678-2-1973 电缆管道.第2部分:钢制地板下管道规范 Cable trunking – Steel underfloor (duct) trunking
BS 4678-4-1982 电缆管道.第4部分:绝缘材料制电缆管道规范 Cable trunking – Specification for cable trunking made of insulating material
BS 476-24-1987 建筑材料和结构的燃烧试验.第24部分:通风管道耐火性的测定方法 Fire tests on building materials and structures – Method for determination of the fire resistance of ventilation ducts
BS 5422-2001 工作温度范围为-40℃-+700℃的管道、水箱、容器、管道工程和设备用隔热材料的规定方法 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C
BS 5588 Pt.9-1989 建筑物设计、施工和使用中的防火措施.第9部分:通风和空调管道的实用规范 Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork
BS 5588-9-1999 建筑物设计、施工和使用中的防火措施.通风和空调管道工程实施规程 Fire precautions in the design, construction and use of buildings – Code of practice for ventilation and air conditioning ductwork
BS 5608-1993 管道工程和设备隔热用预成型刚性聚氨基甲酸乙酯(PUR)和聚异氰尿酸酯(PIR)泡沫规范 Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment
BS 5682-1998 医疗用燃气管道系统探测头(快速连接器)规范 Specification for probes (quick connectors) for use with medical gas pipeline systems
BS 5857-1.1-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第1节:总则 Methods for measurement of fluid flow in closed conduits, using tracers – Measurement of water flow – General
BS 5857-1.2-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第2节:非放射性示踪剂恒速喷射法 Methods for measurement of fluid flow in closed conduits, using tracers – Measurement of water flow – Constant rate injection method using non-radioactive tracers
BS 5857-1.3-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第3节:放射性示踪剂恒速喷射法 Methods for measurement of fluid flow in closed conduits, using tracers – Measurement of water flow – Constant rate injection method using radioactive tracers
BS 5857-1.4-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第4节:非放射性示踪剂渡越时间法 Methods for measurement of fluid flow in closed conduits, using tracers – Measurement of water flow – Transit time method using non-radioactive tracers
BS 5857-1.5-1980 密封管道中流体流量的示踪剂测量法.第1部分:水流量测量.第5节:放射性示踪剂渡越时间法 Methods for measurement of fluid flow in closed conduits, using tracers – Measurement of water flow – Transit time method using radioactive tracers
BS 5857-2.1-1980 密封管道中流体流量的示踪剂测量法.第2部分:气体流量测量.第1节:总则 Methods for measurement of fluid flow in closed conduits, using tracers – Measurement of gas flow – General
BS 5857-2.4-1980 使用示踪剂的密封管道中流体流量的测量方法.气体流量的测量.采用放射性示踪剂的过渡时间法 Methods for measurement of fluid flow in closed conduits, using tracers – Measurement of gas flow – Transit time method using radioactive tracers
BS 5864-2004 额定输入净值不超过70kW的燃气管道式空气加热器的安装和维修(2类和3类燃气).规范 Installation and maintenance of gas-fired ducted air heaters of rated input not exceeding 70 kW net (2nd and 3rd family gases) – Specification
BS 5911-5-2004 混凝土管和辅助混凝土制品.带软接头的预应力非压力管道和配件的规范 Concrete pipes and ancillary concrete products – Specification for prestressed non-pressure pipes and fittings with flexible joints
BS 5927-1980 石棉水泥管道敷设指南 Guide for laying of asbestos-cement pipelines
BS 5955-6-1980 塑料管道工程(热塑性塑料).第6部分:自重排水和下水道用未增塑聚氯乙烯管道工程安装惯例 Plastics pipework (thermoplastics materials) – Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers
BS 5955-8-2001 塑料管道工程(热塑性材料).家用冷、热水设施和建筑物中加热系统用的热塑性塑料管道工程及其配件的安装规范 Plastics pipework (thermoplastics materials) – Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
BS 5970-2001 温度范围从-100℃至+870℃的管道工程及设备隔热的实施规程 Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 °C to +870 °C
BS 5M 23-1987 管道识别系统规范 Specification for an identification scheme for pipelines
BS 6100-2.8-1990 建筑和土木工程术语.第2部分:土木工程.第8集:管道和导管 Glossary of building and civil engineering terms – Civil engineering – Pipelines and ducts
BS 6199-1.2-1991 用称重及体积法测定密封管道中流体流量的方法.第1部分:称重法.第2节:静态称重装置检验程序 Measurement of liquid flow in closed conduits using weighing and volumetric methods – Weighing method – Procedures for checking static weighing systems
BS 6209-1982 不加压热塑性管道系统用溶剂粘合剂规范 Specification for solvent cement for non-pressure thermoplastics pipe systems
BS 65-1991 只用于地表水管道和配件的陶管、配件、导管和挠性机械接头规范 Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
BS 6891-2005 家用燃气低压管道(R1<=35mm)的安装规范(2类燃气) Installation of low pressure gas pipework of up to 35 mm (R1?) indomestic premises (2nd family gas) – Specification
BS 6911-6-1992 运土机械试验.第6部分:侧面带起重吊杆的管道敷设机和轮式拖拉机或装载机的升降能力评定方法 Testing earth-moving machinery – Method for the evaluation of lift capacity of pipelayers and wheel tractors or loaders equipped with side boom
BS 6914-5-1999 土方机械术语(包括尺寸和符号的定义).管道铺设机术语汇编 Terminology (including definitions of dimensions and symbols) for earth-moving machinery – Glossary for pipelayers
BS 6920-2.2.2-2000 通过其对水质的影响确定与人类用水接触的非金属产品的适用性.试验方法.水的气味和味道.用软管、合成管及管 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water – Methods of test – Odour and flavour of water – Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes – Section 2.2: Taste of water Sub-section 2.2.2: Method of testing tastes imparted to water by hoses
BS 6946-1988 电气设备用金属管道电缆支撑系统规范 Specification for metal channel cable support systems for electrical installations
BS 7121-14-2005 起重机安全操作实施规程.起重机侧臂管道敷设机 Code of practice for safe use of cranes – Part 14: Side boom pipelayers
BS 7159-1989 特殊工厂或工地用玻璃纤维增强塑料管道系统的设计和建造实用规程 Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites
BS 7405-1991 封闭管道液体流量测量用流量计选择和应用指南 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
BS 7523-1991 管道热绝缘用预成形多孔聚乙烯材料规范 Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework
BS 7576-1992 液化天然气的输送管道连续取样方法 Method for continuous sampling of liquefied natural gas (LNG) in transfer pipelines
BS 7634-1993 医疗用气体管道系统用氧化浓缩器规范 Specification for oxygen concentrators for use with medical gas pipeline systems
BS 7677-1993 管道接头用密封圈缺陷分类推荐标准 Recommendations for classification of imperfections in pipe joint rings
BS 7797-1998 使用金属屏蔽元件的工业管道加热器规范 Specification for industrial duct heaters using metal-sheathed elements
BS 7834-1995 密闭管道气流测量用涡轮表规范 Specification for turbine meters used for the measurement of gas flow in closed conduits
BS 7838-1996 直径达到28 mm的低压气体管道系统用的波纹状不锈钢半硬式管材和有关配件规范 Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to 28 mm
BS 7874-1998 管道工程和管线系统连接的弹性密封件微生物损害的试验方法 Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines
BS 8010-2.1-1987 管道的实用规程.陆地管道:设计、制造和安装.可锻铁管 Code of practice for pipelines – Pipelines on land: design, construction and installation – Ductile iron
BS 8010-2.3-1989 管道实用规程.陆上管道:设计、制造和安装.石棉水泥管 Code of practice for pipelines. Pipelines on land: design, construction and installation. Asbestos cement
BS 8010-2.4-1988 管道实用规程.陆上管道:设计、制造和安装.预应力混凝土承压管 Code of practice for pipelines. Pipelines on land: design, construction and installation. Prestressed concreted pressure pipelines
BS 8010-2.5-1989 管道的实用规程.第2部分:陆地管道:设计、制造和安装.第5节:玻璃纤维加强的热固性塑料制品 Code of practice for pipelines – Pipelines on land: design, construction and installation – Glass reinforced thermosetting plastics
BS 8010-2.7-1989 管道实用规程.陆上管道:设计、制造和安装.预铸混凝土管 Code of practice for pipelines. Pipelines on land: design, construction and installation. Precast concrete
BS 8313-1997 建筑物管道使用方便实施实用规程 Code of practice for accommodation of building services in ducts
BS C 18-1976 航空用管道和导管用V形法兰联结器规范.公制系列 Specification for V-flange couplings for aircraft piping and ducting – metric series
BS CP 312-1-1973 塑料管道(热塑性材料)实施规程.一般原则和材料的选择 Code of practice for plastics pipework (thermoplastics material) – General principles and choice of material
BS CP 312-2-1973 塑料管道(热塑性材料)实施规程. 承压下液体输送用的未增塑的聚氯乙烯(PVC)管道 Code of practice for plastics pipework (thermoplastics material) – Unplasticized PVC pipework for the conveyance of liquids under pressure
BS DD CEN/TS 12200-2-2003 地上外部用塑料雨水管道系统.未增塑聚氯乙烯管.符合性评定指南 Plastics rainwater piping systems for above ground external use – Unplasticized poly (vinyl chloride) (PVC-U) – Guidance for the assessment of conformity
BS DD CEN/TS 12201-7-2004 给水用塑料管道设备.聚乙烯(PE).合格评定指南 Plastics piping systems for water supply – Polyethylene (PE) – Guidance for the assessment of conformity
BS DD CEN/TS 12666-2-2006 非承压地下排放和污水用塑料管道系统.聚乙烯(PE).符合性评定指南 Plastics piping systems for non-pressure underground drainage and sewerage – Polyethylene (PE) – Guidance for the assessment of conformity
BS DD CEN/TS 13244-7-2004 排水和污水处理通用地下和地上压力设备用塑料管道系统.聚乙烯(PE).符合性评定指南 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Guidance for the assessment of conformity
BS DD CEN/TS 1456-2-2003 压力下直埋式和地上排水和排污用塑料管道系统.未增塑聚氯乙烯(PVC-U).合格评定指南 Plastic piping systems for buried and above-ground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride) (PVC-U) – Guidance for the assessment of conformity
BS DD CEN/TS 14578-2003 给水或排水和下水道用塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GPR).安装的推荐实施 Plastics piping systems for water supply or drainage and sewerage – Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) – Recommended practice for installation
BS DD CEN/TS 1555-7-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).合格评定指南 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Guidance for the assessment of conformity
BS DD CEN/TS 1852-3-2003 非压力地下排水和排污塑料管道系统.聚丙烯(PP).安装指南 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Guidance for installation
BS DD CLC/TS 50430-2005 光缆.燃气管道电缆.高压燃气管道电缆的系列规范 Optical fibre cables – Gas pipe cables – Family specifications for cables to be installed in high pressure gas pipes
BS DD CLC/TS 50431-2005 光缆.饮用水管道电缆.饮用水管道电缆的系列规范 Optical fibre cables – Drinking water pipe cables – Family specification for cables to be installed in drinking water pipes
BS DD ENV 12108-2001 塑料管道系统.建筑物内部人消费用冷热水的压力系统的安装指南 Plastics piping systems – Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
BS DD ENV 1329-2-2001 建筑内污物污水排放(高、低温)用塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Unplasticized poly(vinyl chloride) (PVC-U) – Guidance for the assessment of conformity
BS DD ENV 13801-2001 建筑物内污物污水排放(低温和高温)用塑料管道系统.热塑管.推荐的安装实施规程 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Thermoplastics – Recommended practice for installation
BS DD ENV 1401-2-2001 非承压地下排放和污水用塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinylchloride) (PVC-U) – Guidance for assessment of conformity
BS DD ENV 1401-3-2001 非承压地下排放和污水用塑料管道系统.未增塑的聚氯乙烯(PVC-U).安装指南 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinylchloride) (PVC-U) – Guidance for installation
BS DD ENV 1451-2-2001 建筑物内污物和污水排放(高、低温)用塑料管道系统.聚丙烯(PP).符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene (PP) – Guidance for the assessment of conformity
BS DD ENV 1452-6-2002 供水用的塑料管道系统.未增塑的聚氯乙烯(PVC-U).安装指南 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Guidance for installation
BS DD ENV 1452-7-2001 供水用的塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Guidance for the assessment of conformity
BS DD ENV 1453-2-2001 建筑物内污物和废水排放(高、低温)用带结构壁管的塑料管道系统.未增塑的聚氯乙烯(PVC-U).符合性评定指南 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings – Unplasticized poly(vinyl chloride) (PVC-U) – Guidance for the assessment of conformity
BS DD ENV 1455-2-2001 建筑物内污物污水排放(高、低温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物(ABS).符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Acrylonitrile-butadiene- styrene (ABS) – Guidance for the assessment of conformity
BS DD ENV 1519-2-2001 建筑物内污物污水排放(高、低温)用塑料管道系统.聚乙烯(PE).符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polyethylene (PE) – Guidance for the assessment of conformity
BS DD ENV 1565-2-2001 建筑物内污物废水排放(高、低温)用塑料管道系统.苯乙烯共聚物混合物(SAN + PVC).符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Styrene copolymer blends (SAN + PVC) – Guidance for the assessment of conformity
BS DD ENV 1566-2-2001 建筑物内污物污水排放(高、低温)用塑料管道系统.氯化聚氯乙烯(PVC-C).符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Chlorinated poly(vinyl chloride) (PVC-C) – Guidance for the assessment of conformity
BS DD ENV 1852-2-2001 非承压地下排放和污水用塑料管道系统.聚丙烯(PP).符合性评定指南 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Guidance for the assessment of conformity
BS DD ENV 1998-4-1999 欧洲法规 8:抗地震结构件的设计条例.筒仓、罐和管道 Eurocode 8: Design provisions for earthquake resistance of structures – Silos, tanks and pipelines
BS DD ENV 737-6-2003 医用气体管道系统.压缩医用气体终端设备和真空终端设备用探针的尺寸和定位 Medical gas pipeline systems – Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum
BS EN 10242-1995 可锻铸铁的螺纹管道配件 Threaded pipe fittings in malleable cast iron
BS EN 10253-1-1999 对接焊管道接头.通用和无特殊检验要求的锻制碳钢 Butt-welding pipe fittings – Wrought carbon steel for general use and without specific inspection requirements
BS EN 10288-2002 岸上和近海管道用钢管及配件.外部的双层挤压聚乙烯基涂层 Steel tubes and fittings for onshore and offshore pipelines – External two layer extruded polyethylene based coatings
BS EN 10289-2002 岸上和近海管道用钢管和配件.外用液体涂刷的环氧涂料及环氧改性的涂料 Steel tubes and fittings for onshore and offshore pipelines – External liquid applied epoxy and epoxy-modified coatings
BS EN 10301-2003 岸上及海底管道用钢管及配件.非腐蚀性气体的输送用减少摩擦的内涂层 Steel tubes and fittings for on and offshore pipelines – Internal coating for the reduction of friction for conveyance of non corrosive gas
BS EN 10329-2006 海上或离岸管道用钢管和管件.外部连接包覆层 Steel tubes and fittings for onshore and offshore pipelines – External field joint coatings
BS EN 1053-1996 塑料管道系统.无压力情况下使用的热塑管道系统.防水性的检验方法 Plastics piping systems – Thermoplastics piping systems for non-pressure applications – Test methods for watertightness
BS EN 1054-1996 塑料管道系统.建筑物内粪水和污水排放下水道用热塑管道系统.连接件的气密性试验方法 Plastics piping systems – Thermoplastics piping systems for soil and waste discharge – Test method for airtightness of joints
BS EN 1055-1996 塑料管道系统.建筑物内粪水污排放用热塑制管道系统.耐高温度循环的试验方法 Plastics piping systems – Thermoplastics piping systems for soil and waste discharge inside buildings – Test method for resistance to elevated temperature cycling
BS EN 1056-1996 塑料管道系统.塑料管道和配件.直接(自然)风化的方法 Plastics piping and ducting systems – Plastics pipes and fittings – Method for exposure to direct (natural) weathering
BS EN 1092-3-2004 法兰及其连接件.标注PN的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Copper alloy flanges
BS EN 1092-4-2002 法兰及其连接件.按PN标注的管道、阀门、配件和附件用圆形法兰.铝合金法兰 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Aluminium alloy flanges
BS EN 1119-1996 塑料管道系统.玻璃增强的热固塑料管和配件.挠性和还原接合接头密封性和耐损伤性试验方法 Plastics piping systems – Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings – Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints
BS EN 1120-1996 塑料管道系统.玻璃增强的热固塑料管和配件.偏离规定条件下部件内部耐化学侵蚀性能的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Determination of the resistance to chemical attack from the inside of a section in a deflected condition
BS EN 1124-2-1999 废水系统用插接式纵向焊接不锈钢管道和配件.系统5.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems – System S. Dimensions
BS EN 12056-2-2000 建筑物内部的自流排水系统.卫生管道设计和计算 Gravity drainage systems inside buildings – Sanitary pipework, layout and calculation
BS EN 12061-1999 塑料管道系统.热塑配件.耐冲击试验方法 Plastics piping systems – Thermoplastics fittings – Test method for impact resistance
BS EN 12095-1997 塑料管道系统.雨水管道系统用托架.托架强度试验方法 Plastics piping systems – Brackets for rainwater piping systems – Test method for bracket strength
BS EN 12099-1997 塑料管道系统.聚乙烯管材和组件.挥发物价改革含量的测定 Plastics piping systems – Polyethylene piping materials and components – Determination of volatile content
BS EN 12100-1998 塑料管道系统.聚乙稀(PE)阀门.阀座间抗弯曲性的试验方法 Plastics piping systems – Polyethylene (PE) valves – Test method for resistance to bending between supports
BS EN 12106-1998 塑料管道系统.聚乙稀(PE)阀门.挤压后抗内压力的试验方法 Plastics piping systems – Polyethylene (PE) pipes – Test method for the resistance to internal pressure after application of squeeze-off
BS EN 12107-1998 塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定 Plastics piping systems – Injection-moulded thermoplastics fittings, valves and ancillary equipment – Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
BS EN 12117-1998 塑料管道系统.管件、阀门和附件.气体流速与压降之间关系的测定 Plastics piping systems – Fittings, valves and ancillaries – Determination of gaseous flow rate/pressure drop relationships
BS EN 12118-1998 塑料管道系统.用库仑分析法测定热塑性塑料中的水含量 Plastics piping systems – Determination of moisture content in thermoplastics by coulometry
BS EN 12119-1997 塑料管道系统.聚乙烯(PE)阀.耐力热循环抗性的测试方法 Plastics piping systems – Polyethylene (PE) valves – Test method for resistance to thermal cycling
BS EN 12200-1-2000 地上外部用塑料雨水管道系统.未增塑聚氯乙烯.管道、配件和系统规范 Plastics rainwater piping systems for above ground external use – Unplasticized poly (vinyl chloride) (PVC-U) – Specifications for pipes, fittings and the system
BS EN 12201-1-2003 供水用塑料管道系统.聚乙烯.总则 Plastic piping systems for water supply – Polyethylene (PE) – General
BS EN 12201-2-2003 供水用塑料管道系统.聚乙烯.管道 Plastic piping systems for water supply – Polyethylene (PE) – Pipes
BS EN 12201-3-2003 供水用塑料管道系统.聚乙烯.配件 Plastic piping systems for water supply – Polyethylene (PE) – Fittings
BS EN 12201-4-2002 供水用塑料管道系统.聚乙烯.阀门 Plastic piping systems for water supply – Polyethylene (PE) – Valves
BS EN 12201-5-2003 供水用塑料管道系统.聚乙烯.系统目的的适应性 Plastic piping systems for water supply – Polyethylene (PE) – Fitness for purpose of the system
BS EN 12220-1998 建筑物通风.管道作业.一般通风用圆法兰 Ventilation for buildings – Ductwork – Dimensions of circular flanges for general ventilation
BS EN 12236-2002 建筑物的通风.管道悬吊装置和支架.强度要求 Ventilation for buildings – Ductwork hangers and supports – Requirements for strength
BS EN 12237-2003 建筑物的通风.管道系统.圆薄金属管道的强度和泄漏 Ventilation for buildings – Ductwork – Strength and leakage of circular sheet metal ducts
BS EN 1225-1996 塑料管道系统.玻璃增强的热固性塑料管.潮湿条件下蠕变因数的测定和长期特定环状物刚度的计算 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
BS EN 12256-1998 塑料管道系统.热塑配件.纤维配件机械强度和柔韧性试验方法 Plastic piping systems – Thermoplastic fittings – Test method for mechanical strength or flexibility of fabricated fittings
BS EN 1226-1996 塑料管道系统.玻璃增强的热固性塑料管.验证抗初期环状物挠曲的试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Test method to prove the resistance to initial ring deflection
BS EN 1227-1998 塑料管道系统.玻璃增强热固性塑料(GRP)管.潮湿条件下长期极限相对环形偏差值的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long-term ultimate relative ring deflection under wet conditions
BS EN 1228-1997 塑料管道系统.玻璃纤维的增强热固塑料(GFK).特定初始环状刚性测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of initial specific ring stiffness
BS EN 1229-1997 塑料管道系统.玻璃增强的热固性塑料管.验证短期内部压力下墙的密封性试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Test methods to prove the leaktightness of the wall under short-term internal pressure
BS EN 12293-2000 塑料管道系统.热水和冷水用热塑管和配件.已安装的组件耐温度变化性能的试验方法 Plastics piping systems – Thermoplastics pipes and fittings for hot and cold water – Test method for the resistance of mounted assemblies to temperature cycling
BS EN 12294-2000 塑料管道系统.热水和冷水系统.真空渗漏性试验方法 Plastic piping systems – Systems for hot and cold water – Test method for leaktightness under vacuum
BS EN 12295-2000 塑料管道系统.热水和冷水用热塑管和附属配件.连接件耐压力变化的试验方法 Plastics piping systems – Thermoplastics pipes and associated fittings for hot and cold water – Test method for resistance of joints to pressure cycling
BS EN 12308-1998 液化天然气设施和设备.用于液化天然气管道的法兰接头垫圈设计适配性试验 Installations and equipment for LNG – Suitability testing of gaskets designed for flanged joints used on LNG piping
BS EN 12474-2001 海底管道的阴极保护 Cathodic protection for submarine pipelines
BS EN 12514-2-2000 油燃烧器供油系统的安装.安全性要求和试验.部件、阀门、管道、过滤器、油空气分离器、油量计 Installations for oil supply systems for oil burners – Safety requirements and tests – Parts, valves, pipes, filters, oil de-aerators, meters
BS EN 12585-1999 玻璃装置、管道和管件.DN 15至DN 1000的管道和管件.兼容性和可互换性 Glass plant, pipeline and fittings – Pipeline and fittings DN 15 to 1000 – Compatibility and interchangeability
BS EN 12613-2001 具有视觉特征的地下电缆和管道用塑料警告装置 Plastic warning devices for underground cables and pipelines with visual characteristics
BS EN 12735-1-2001 铜和铜合金.空调和制冷用无缝圆铜管.管道系统用管 Copper and copper alloys – Seamless, round copper tubes for air conditioning and refrigeration – Tubes for piping systems
BS EN 1277-2004 塑料管道系统.地下无压用热塑性管道系统.弹性密封环型接头密封性的试验方法 Plastics piping systems – Thermoplastics piping systems for buried non-pressure applications – Test methods for leaktightness of elastomeric sealing ring type joints
BS EN 12842-2000 PVC-U或PE管道系统用球墨铸铁配件.要求和试验方法 Ductile iron fittings for PVC-U or PE piping systems – Requirements and test methods
BS EN 1295-1-1998 不同负荷条件下地下管道的结构设计.一般要求 Structural design of buried pipelines under various conditions of loading – Part 1:General requirements
BS EN 12954-2001 埋于土内或浸于液体的金属结构的阴极保护.管道应用和一般原则 Cathodic protection of buried or immersed metallic structures – General principles and application for pipelines
BS EN 13052-1-2001 材料对人生活用水的影响.有机物质.管道系统中水的颜色和浊度的测定.试验方法 Influence of materials on water intended for human consumption – Organic materials – Determination of colour and turbidity of water in piping systems – Test method
BS EN 13090-2000 建筑物内气体管道的螺纹接头重新密封方法 Means for resealing threaded joints of gas pipework in buildings
BS EN 13136-2001 灭火系统和热力泵.释压装置和配套管道.计算方法 Refrigerating systems and heat pumps – Pressure relief devices and their associated piping – Methods for calculation
BS EN 13141-8-2006 建筑物的通风.住宅通风用部件/产品的性能试验.独户住宅机械通风系统用非管道机械供气和排气通风装置(包括热 Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
BS EN 13220-1999 医用燃气管道系统终端元件连接用流量计装置 Flow-metering devices for connection to terminal units of medical gas pipeline systems
BS EN 13244-1-2003 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.总则 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – General
BS EN 13244-2-2003 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.管道 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Pipes
BS EN 13244-3-2003 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.配件 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Fittings
BS EN 13244-4-2003 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.阀门 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Valves
BS EN 13244-5-2003 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.系统目的的适合性 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Fitness for purpose of the system
BS EN 1329-1-2000 建筑物结构内粪水和废水排放(低和高温)用塑料管道系统.未增塑的聚氯乙烯(PVC-U).管道,配件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Unplasticized poly(vinyl chloride) (PVC-U) – Specifications for pipes, fittings and the system
BS EN 13312-1-2001 生物技术.管道和仪表性能标准.一般性能标准 Biotechnology – Performance criteria for piping and instrumentation – General performance criteria
BS EN 13312-2-2001 生物技术.管道和仪表性能标准.耦合 Biotechnology – Performance criteria for piping and instrumentation – Couplings
BS EN 13312-3-2001 生物技术.管道和仪表性能标准.取样和接种装置 Biotechnology – Performance criteria for piping and instrumentation – Sampling and inoculation devices
BS EN 13312-4-2001 生物技术.管道和仪表性能标准.管和管道 Biotechnology – Performance criteria for piping and instrumentation – Tubes and pipes
BS EN 13312-5-2001 生物技术.管道和仪表性能标准.阀门 Biotechnology – Performance criteria for piping and instrumentation – Valves
BS EN 13312-6-2001 生物技术.管道和仪表性能标准.设备探头 Biotechnology – Performance criteria for piping and instrumentation – Equipment probes
BS EN 13403-2003 建筑物通风.非金属管道.绝缘制管板制成的管道 Ventilation for buildings – Non metallic ducts – Ductwork made from insulation ductboards
BS EN 13461-2001 包装.圆柱柔性叠层板管道.尺寸和公差 Packaging – Cylindrical flexible laminated tubes – Dimensions and tolerances
BS EN 13480-1-2002 金属制工业管道.总则 Metallic industrial piping – General
BS EN 13480-2-2002 金属制工业管道.材料 Metallic industrial piping – Materials
BS EN 13480-3-2002 金属工业管道.设计和计算 Metallic industrial piping – Design and calculation
BS EN 13480-4-2002 金属制工业管道.制造和安装 Metallic industrial piping – Fabrication and installation
BS EN 13480-5-2002 金属制工业管道.检测和试验 Metallic industrial piping – Inspection and testing
BS EN 13480-6-2004 金属工业管道.埋管的附加要求 Metallic industrial piping – Additional requirements for buried piping
BS EN 13544-2-2002 呼吸治疗设备.管道和连接件 Respiratory therapy equipment – Tubing and connectors
BS EN 13566-1-2003 地下无压排水管网和污水管网翻新用塑料管道系统.总则 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – General
BS EN 13566-3-2003 地下无压排水管网和污水管网翻新用塑料管道系统.紧密配合管加衬 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Lining with close fit pipes
BS EN 13566-4-2003 地下无压排水管网和污水管网翻新用塑料管道系统.现场加工管衬里 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Lining with cured-in-place pipes
BS EN 13598-1-2003 无压力地下排水和排污用塑料管道系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE).第1部分:包括浅层检 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) – Specifications for ancillary fittings including shallow inspection chambers
BS EN 13636-2004 地下金属罐和相关管道的阴极保护 Cathodic protection of buried metallic tanks and related piping
BS EN 1366-1-1999 服务设施的耐火试验.管道 Fire resistance tests for service installations – Fire resistance tests for service installations – Ducts
BS EN 13675-2004 机械安全.管道成型和轧制机及其精整作业线设备的安全要求 Safety of machinery – Safety requirements for tube forming and rolling mills and their finishing line equipment
BS EN 13689-2003 改建用塑料管道系统的分类和设计指南 Guidance on the classification and design of plastics piping systems used for renovation
BS EN 1393-1997 塑料管道系统.玻璃增强热固性塑料(GRP)管.初始轴向拉伸特性的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of initial longitudinal tensile properties
BS EN 1394-1997 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.外表初始圆周抗拉强度的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the apparent initial circumferential tensile strength
BS EN 13941-2003 直接采暖用的粘结预隔热层管道系统的设计和安装 Design and installation of preinsulated bonded pipe systems for direct heating
BS EN 13942-2003 石油和天然气工业.管道输送.管道阀 Petroleum and natural gas industries – Pipeline transportation – Pipeline valves
BS EN 1401-1-1998 不承压地下雨水管和污水管用塑料管道系统.未增塑聚氯乙烯(PVC-U).管道、配件和系统规范 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinylchloride) (PVC-U) – Specifications for pipes, fittings and the system
BS EN 14125-2005 汽油加油站的地下装置用热塑柔性金属管道 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS EN 14141-2003 天然气输送用管道阀.性能要求和试验 Valves for natural gas transportation in pipelines – Performance requirements and tests
BS EN 14161-2003 石油和天然气工业.管道输送系统 Petroleum and natural gas industries – Pipeline transportation systems
BS EN 14163-2001 石油和天然气工业.管道运输系统.管道焊接 Petroleum and natural gas industries – Pipeline transportation systems – Welding of pipelines
BS EN 1420-1-1999 有机材料对供人用的水的影响.管道系统中水气味的测定.第1部分:试验方法 Influence of organic materials on water intended for human consumption – Determination of odour and flavour assessment of water in piping systems – Influence of organic materials on water intended for human consumption – Determination of odour and flavour assessment of water in piping systems – Part 1: Test method
BS EN 14239-2004 建筑物通风.管道系统.管道系统表面积的测量 Ventilation for buildings – Ductwork – Measurement of ductwork surface area
BS EN 1437-2003 塑料管道系统.地下排水排污用管道系统.耐组合温度循环和外加负荷的试验方法 Plastics piping systems – Piping systems for underground drainage and sewerage – Test method for resistance to combined temperature cycling and external loading
BS EN 1444-2001 纤维水泥管道.管道敷设和现场施工指南 Fibre-cement pipelines – Guide for laying and on-site work practices
BS EN 1446-1996 塑料管道及保护管系统.热塑管.环形挠形测定 Plastics piping and ducting systems.Thermoplastics pipes – Determination of ring flexibility
BS EN 1447-1997 塑料管道系统.玻璃增强的热固性塑料管道.长期耐内压能力的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of long-term resistance to internal pressure
BS EN 1448-1997 塑料管道系统.玻璃增强的热固塑料(GRP)组件.带弹性密封件的刚性锁紧插承接合的设计验证试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) components – Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals
BS EN 1449-1997 塑料管道系统.玻璃纤维增强的热固性塑料(GRP)元件.混凝土套管插承接合的设计验证试验方法 Plastics piping systems – Glass reinforced thermosetting plastics (GRP) components – Test methods to prove the design of cemented socket-and-spigot joints
BS EN 1450-1997 塑料管道系统.玻璃增强的热固塑料(GRP)布件.螺栓法兰连接的设计验证试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) components – Test methods to prove the design of bolted flange joints
BS EN 1451-1-2000 建筑物结构内粪水和废水排出(低和高温)用塑料管道系统.聚丙烯(PP).管道,配件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene (PP) – Specifications for pipes, fittings and the system
BS EN 1452-1-2000 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).通则 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – General
BS EN 1452-2-2000 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).管材 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Pipes
BS EN 1452-3-2000 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).配件 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Fittings
BS EN 1452-4-2000 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).阀门和附属设备 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Valves and ancillary equipment
BS EN 1452-5-2000 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).对系统的适用性 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Fitness for purpose of the system
BS EN 14525-2005 不同材料管道用球墨铸铁大公差联接器和法兰接头:球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
BS EN 1453-1-2000 建筑物内粪水和废水排放(低和高温)用的结构墙壁管道的塑料管道系统.非增塑的聚氯乙烯(PVC-U)的管道和系统规 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings – Unplasticized poly (vinyl chloride) (PVC-U) – Specifications for pipes and the system
BS EN 1455-1-2000 建筑物结构内的污物和废水(低和高温)排出用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.管道,配件和系统规范 Plastics piping systems for soil and waste (low and high temperature) within the building structure – Acrylonitrile-butadiene-styrene (ABS) – Specifications for pipes, fittings and the system
BS EN 1456-1-2001 地下埋设的和地上铺设的承压排水和排污用塑料管道系统.未增塑的聚氯乙烯(PVC-U).管道部件和系统的规范 Plastic piping systems for buried and above-ground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride) (PVC-U) – Specifications for piping components and the system
BS EN 14741-2006 热塑管和管道系统.非压力掩埋用接头.通过评估密封压力测定弹性密封件接合处的长期密封性能的试验方法 Thermoplastics piping and ducting systems – Joints for buried non-pressure applications – Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
BS EN 14870-1-2004 石油和天然气工业.管道运输系统的感应管弯头、配件和法兰.感应管弯头 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Induction bends
BS EN 14870-2-2005 石油和天然气工业.管道运输系统的吸入管弯头、配件和法兰.配件 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Fittings
BS EN 14870-3-2006 石油和天然气工业.管道运输系统的吸入管弯头、配件和法兰.法兰 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 3: Flanges
BS EN 1519-1-2000 建筑物结构内粪水和废水排出(低和高温)用塑料管道系统.聚乙烯(PE).管道,配件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polyethylene (PE) – Specifications for pipes, fittings and the system
BS EN 1555-1-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).总则 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – General
BS EN 1555-2-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).管道 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Pipes
BS EN 1555-3-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).配件 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Fittings
BS EN 1555-4-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).阀门 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Valves
BS EN 1555-5-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).系统的适用性 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Fitness for the purpose of the system
BS EN 1565-1-2000 建筑物结构内粪水和废水排放(低和高温)用塑料管道系统.苯乙烯共聚物混合物(SAN+PVC).管道,配件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Styrene copolymer blends (SAN + PVC) – Specifications for pipes, fittings and the system
BS EN 1566-1-2000 建筑物结构内的污物和废水(低和高温)排放用塑料管道系统.氯化聚偏二氯乙烯(PVC-C).管道,配件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Chlorinated poly(vinyl chloride) (PVC-C) – Specification for pipes, fittings and the system
BS EN 1594-2000 燃气供应系统.最大工作压力超过16巴的气体管道.功能要求 Gas supply systems – Pipelines for maximum operating pressure over 16 bar – Functional requirements
BS EN 1617-1997 一次用灭菌导液管道和辅助装置. Sterile drainage catheters and accessory devices for single use
BS EN 1638-1997 塑料管道系统.玻璃增强的热固塑料管道(GRP).柱状内压效果的试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Test method for the effects of cyclic internal pressure
BS EN 1680-1997 塑料软管系统.聚乙烯(PE)管道系统用的阀门.弯曲力施加在工作机构上和之后的密封性的检验方法 Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanism
BS EN 1704-1997 塑料管道系统.热塑料管阀.弯曲情况下温度循环后阀门完整性的试验方法 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after temperature cycling under bending
BS EN 1705-1997 塑料管道系统.热塑性阀门.经过外部冲击后阀门的完整性试验方法 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow
BS EN 1716-1997 塑料管道系统.聚乙烯(PE)开孔三通件.安装好的开孔三通上抗冲击应力检测方法 Plastics piping systems – Polyethylene (PE) tapping tees – Test method for impact resistance of an assembled tapping tee
BS EN 1759-3-2004 法兰及其连接件.标注等级的管道、阀门、配件和附件用圆形法兰.铜合金法兰 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, class designated – Copper alloy flanges
BS EN 1759-4-2003 法兰及其连接件.标注等级的管道、阀门、配件及附件用圆形法兰.铝合金法兰 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, class designated – Aluminium alloy flanges
BS EN 1775-1998 燃气供应.建筑物中的燃气管道.最大工作压力为5BAR.功能性推荐标准 Gas supply – Gas pipework in buildings – Maximum operating pressure 5 bar – Functional recommendations
BS EN 1852-1-1998 无压地下排水管和下水道用塑料管道系统.聚丙烯(PP).管道,管配件及系统规范 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Specifications for pipes, fittings and the system
BS EN 1861-1998 制冷系统和热力泵.系统流量图,管道和设备图.布局和符号 Refrigerating systems and heat pumps – System flow diagrams and piping and instrument diagrams – Layout and symbols
BS EN 1862-1998 塑料管道系统.玻璃增强热固性塑料管(GRP).暴露于化学环境后相关蠕变系数的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the relative flexural creep factor following exposure to a chemical environment
BS EN 187105-2002 单膜光纤电缆(管道/直接掩埋设备) Single mode optical cable (duct/direct buried installation)
BS EN 1905-1999 塑料管道系统.未增塑聚氯乙烯管、配件和材料.基于氯的总含量评估聚氯乙烯含量的方法 Plastics piping systems – Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material – Method for assessment of the PVC content based on total chlorine content
BS EN 1946-5-2000 建筑产品和构件的热性能.试验室测量热传递性能评估的特殊标准.通过管道试验方法测量 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Measurements by pipe test methods
BS EN 1979-1999 塑料管道和管道系统.热塑螺旋型结构壁的管道.接缝拉伸强度测定 Plastics piping and ducting systems – Thermoplastics spirally-formed structured-wall pipes – Determination of the tensile strength of a seam
BS EN 1989-2000 热塑管道系统.地下埋装的非承压污水设施用连接件.通过对密封压力的估计对带热塑弹力密封件的连接件的长期密 Thermoplastics piping systems – Joints for buried non-pressure sewerage applications – Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
BS EN 24006-1991 封闭管道中液体流量测量.词汇和符号 Measurement of fluid flow in closed conduits – Vocabulary and symbols
BS EN 24185-1981 封闭管道中流体流量测量.称重法 Measurement of fluid flow in closed conduits – Weighing method
BS EN 253-2003 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层的钢管用组件 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS EN 274-1-2002 卫生器具用废水管道连接件.要求 Waste fittings for sanitary appliances – Requirements
BS EN 274-3-2002 卫生器具用废水管道连接件.质量控制 Waste fittings for sanitary appliances – Quality control
BS EN 288-9-1999 金属材料焊接程序的规范和批准.传输管道的陆地和海岸现场对焊管道的焊接程序试验 Specification and approval of welding procedures for metallic materials – Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
BS EN 29104-1991 封闭管道中液体流量测量.液体电磁流量计性能评定方法 Measurement of fluid flow in closed conduits – Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS EN 295-10-2005 排水和污水管道用陶土管、配件及管连接件.性能要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Performance requirements
BS EN 448-2003 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层钢管用成套配 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 45510-7-1-2000 发电站设备采购指南.管道系统和阀门.高压管道系统.第1节:高压管道系统 Guide for the procurement of power station equipment – Pipework and valves – High pressure piping systems – Section 1: High pressure piping systems
BS EN 45510-7-2-2000 发电站设备采购指南.管道系统和阀门.锅炉和高压阀门.第2节:锅炉和高压阀门 Guide for the procurement of power station equipment – Pipework and valves – Boiler and high pressure valves – Section 2: Boiler and high pressure valves
BS EN 474-9-1998 土方机械.安全性.管道敷设设备的要求 Earth-moving machinery – Safety – Requirements for pipelayers
BS EN 476-1998 排水管道的部件、重力系统的排水管和下水管的一般要求 General requirements for components used in discharge pipes, drains and sewers for gravity systems
BS EN 488-2003 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层钢管用钢阀门 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 489-2003 区域供暖管道.直埋式热水管网用预先绝热有包覆管层的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层的钢管用 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 50085-2-3-2001 电气装置用电缆导管和电缆管道系统.配电箱内安装的线槽电缆主干系统专门要求.第3节:配电箱内开槽 Cable trunking and cable ducting systems for electrical installations – Particular requirements for slotted cable trunking systems intended for installation in cabinets – Section 3: Slotted in cabinets
BS EN 50086-2-4-1994 电气装置用导管系统规范.第2-4部分:地下管道系统专门要求 Specification for conduit systems for cable management – Particular requirements – Conduit systems buried underground
BS EN 50249-2003 地下管道和电缆用电磁波监测器.性能和安全 Electromagnetic locators for buried pipes and cables – Performance and safety
BS EN 50406-2-2004 高比特率电信网络用端用户多组电缆.管道和地下电缆 End user multi-pair cables used in high bit rate telecommunication networks – Duct and buried cables
BS EN 512-1995 纤维水泥制品.压力管道和接头 Fibre-cement products – Pressure pipes and joints
BS EN 545-2002 水管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods
BS EN 579-1994 塑料管道系统.交联聚乙烯(PE-X)管.用溶剂萃取法测定交联密度 Plastics piping systems – Crosslinked polyethylene (PE-X) pipes – Determination of degree of crosslinking by solvent extraction
BS EN 580-2003 塑料管道系统.未增塑聚氯乙烯(PVC-U)管.特定温度下耐二氯甲烷的试验方法 Plastics piping Systems – Unplasticized poly(vinyl chloride) (PVC-U) pipes – Test methods for the resistance to dichloromethane at a specified temperature (DCMT)
BS EN 588-1-1997 下水管和排水道用纤维水泥管.第1部分:重力管路系统用管道、管连接件和管配件 Fibre-cement pipes for sewers and drains – Pipes, joints and fittings for gravity systems
BS EN 637-1995 塑料管道系统.玻璃纤维增强塑料部件.用重量法测定组分量 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method
BS EN 642-1995 包括接头、配件和管道预应力钢特殊要求的圆柱型和非圆柱型预应力混凝土压力管 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
BS EN 705-1995 塑料管道系统.玻璃增强热固性(GRP)塑料管和配件.回归分析及其使用方法 Plastics piping systems – Glass-reinforced thermosetting (GRP) pipes and fittings – Methods for regression analyses and their use
BS EN 712-1995 热塑管道系统.压力管和配件之间端部承载的机械接合.在恒定径向力下抗拔出性能的试验方法 Thermoplastics piping systems – End-load bearing mechanical joints between pressure pipes and fittings – Test method for resistance to pull-out under constant longitudinal force
BS EN 713-1995 塑料管道系统.管件和聚烯烃压力管的机械连接.组件承受弯曲作用时内部压力密封性的试验方法 Plastics piping systems – Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending
BS EN 714-1995 热塑管道系统.压力管和模塑管件的无端负荷弹性密封环型连接件.在无轴向推力时内部流体静压力下密封性的试验 Thermoplastics piping systems – Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings – Test method for leaktightness under internal hydrostatic pressure without end thrust
BS EN 715-1995 热塑管道系统.小直径压力管和配件间端部负荷轴承接头.在包含端推力的内部水压下密封性的试验方法 Thermoplastics piping systems – End-load-bearing joints between small diameter pressure pipes and fittings – Test method for leaktightness under internal water pressure, including end thrust
BS EN 723-1996 铜和铜合金.铜管道和接头的内表面积碳测定的燃烧方法 Copper and copper alloys – Combustion method for determination of carbon on the inner surface of copper tubes or fittings
BS EN 727-1995 塑料管道和管道系统.热塑性塑料管和配件.维卡(vicat)软化温度的测定 Plastics piping and ducting systems – Thermoplastics pipes and fittings – Determination of Vicat softening temperature (VST)
BS EN 728-1997 塑料管和管道系统.聚烯烃管和配件.氧化诱导时间的测定 Plastics piping and ducting systems – Polyolefin pipes and fittings – Determination of oxidation induction time
BS EN 737-1-1998 医疗气体管道系统.压缩医疗气体用和真空用终端设备 Medical gas pipeline systems – Terminal units for compressed medical gases and vacuum
BS EN 737-2-1998 医疗气体管道系统.麻醉气体净化处理系统.基本要求 Medical gas pipeline systems – Anaesthetic gas scavenging disposal systems – Basic requirements
BS EN 737-3-2000 医疗用气体管道系统.压缩医疗气体和真空管道 Medical gas pipeline systems – Pipelines for compressed medical gases and vacuum
BS EN 737-4-1998 医疗气体管道系统.麻醉气体净化系统的端部设备 Medical gas pipeline systems – Terminal units for anaesthetic gas scavenging systems
BS EN 738-2-1999 医用气体用的压力调节器.供气支管压力调节器和输气管道压力调节器 Pressure regulators for use with medical gases – Manifold and line pressure regulators
BS EN 744-1996 塑料管道和导管系统.热塑管.抗日夜外部连续冲击应力的试验方法 Plastics piping and ducting systems – Thermoplastics pipes – Test method for resistance to external blows by the round-the-clock method
BS EN 761-1995 塑料管道系统.玻璃纤维增强热固性塑料管.干燥条件下蠕变系数的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under dry conditions
BS EN 773-1999 液压压力排气管、排水管和污水管道中使用部件的一般要求 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
BS EN 802-1995 塑料管和管道系统.压力管道系统的注射铸造热塑性部件.最大挤压变形试验方法 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings for pressure piping systems – Test method for maximum deformation by crushing
BS EN 803-1995 塑料管道系统.压力管道的弹性密封圈式连接件用注模制热塑塑料性配件.耐无部端推力的快速内压的试验方法 Plastics piping systems – Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping – Test method for resistance to a short-term internal pressure without end thrust
BS EN 804-1995 塑料管道系统.压力管道溶剂胶粘接头的注射模塑承口连接管件.短期内部液压压力的试验方法 Plastics piping systems – Injection-moulded socket fittings for solvent-cemented joints for pressure piping – Test method for resistance to a short-term internal hydrostatic pressure
BS EN 852-1-1996 用于输送人用水的塑料管道系统.游动性评定.游动值的确定 Plastics piping systems for the transport of water intended for human consumption – Migration assessment – Determination of migration values of plastics pipes
BS EN 911-1996 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部流体静压条件下防漏密封试验方法 Plastics piping systems – Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping – Test method for leaktightness under external hydrostatic pressure
BS EN 917-1997 塑料管道系统.热塑阀门.抗内压和泄漏密封性的试验方法 Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leaktightness
BS EN 922-1995 塑料管和管道系统.未增塑聚氯乙烯管道和配件.粘度系数测定和K值计算的样品准备 Plastics piping and ducting systems – Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) – Specimen preparation for determination of the viscosity number and calculation of the k-value
BS EN 969-1996 煤气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
BS EN ISO 10380-2003 管道系统.波纹状金属软管和软管组件 Pipework – Corrugated metal hoses and hose assemblies
BS EN ISO 10472-3-1998 工业洗衣机的安全要求.第3部分:管道式洗涤线及组合机械 Safety requirements for industrial laundry machinery – Washing tunnel lines including component machines
BS EN ISO 10806-2004 管道工程.波纹状金属软管用配件 Pipework – Fittings for corrugated metal hoses
BS EN ISO 10807-1997 管道工程.在爆燃性大气中电缆保护用皱纹软金属管组件 Pipework – Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
BS EN ISO 11691-1997 声学.无气流管道消声器插入的损耗测量.实验室调查法 Acoustics – Measurement of insertion loss of ducted silencers without flow – Laboratory survey method
BS EN ISO 12162-1996 压力用热塑性塑料管道和管件.分类和设计.总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure applications – Classification and design – Overall service (design) coefficient
BS EN ISO 13703-2001 石油和天然气工业.近海生产平台管道系统设计和安装 Petroleum and natural gas industries – Design and installation of piping systems on offshore production platforms
BS EN ISO 13783-1998 塑料管道系统.硬聚氯乙烯(PVC-U)端部承受负荷的双承口连接件.密封和承受弯曲内压的试验方法 Plastics piping systems – Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints – Test method for leaktightness and strength while subjected to bending and internal pressure
BS EN ISO 13844-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下的密封性试验方法 Plastics piping systems – Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes – Test method for leaktightness under negative pressure
BS EN ISO 13845-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验 Plastics piping systems – Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes – Test method for leaktightness under internal pressure and with angular deflection
BS EN ISO 13846-2001 塑料管道系统.热塑性压力管用端负载和无端负载支承组件和接头.内部水压下长期密封性的试验方法 Plastics piping systems – End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping – Test method for long-term leaktightness under internal water pressure
BS EN ISO 14692-1-2003 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.词汇、符号、应用和材料 Petroleum and natural gas industries – Glass-reinforced plastics (GRP) piping – Vocabulary, symbols, applications and materials
BS EN ISO 14692-2-2003 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.合格评定和生产 Petroleum and natural gas industries – Glass-reinforced plastics (GRP) piping – Qualification and manufacture
BS EN ISO 14692-3-2003 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.系统设计 Petroleum and natural gas industries – Glass-reinforced plastics (GRP) piping – System design
BS EN ISO 14692-4-2003 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.制造、安装和运行 Petroleum and natural gas industries – Glass-reinforced plastics (GRP) piping – Fabrication, installation and operation
BS EN ISO 14723-2002 石油和天然气工业.管道输送系统.海下管道阀门 Petroleum and natural gas industries – Pipeline transportation systems – Subsea pipeline valves
BS EN ISO 14726-1-2000 船舶和航海技术.管道系统内含物的识别颜色.主要颜色和介质 Ships and marine technology – Identification colours for the content of piping systems – Main colours and media
BS EN ISO 15465-2004 管道.带绕金属软管和软管组件 Pipework – Stripwound metal hoses and hose assemblies
BS EN ISO 15493-2003 工业用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).元 Plastics piping systems for industrial applications – Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) – Specifications for components and the system – Metric series
BS EN ISO 15494-2003 工业用塑料管道系统.聚丁烯(PB)、聚乙烯(PE)和聚丙烯(PP).元件和系统的规范.米制系列 Plastics piping systems for industrial applications – Polybutene (PB), polyethylene (PE) and polypropylene (PP) – Specifications for components and the system – Metric series
BS EN ISO 15749-2-2004 船舶和海上技术.船舶和海上结构物的排水系统.重力系统用卫生排水和排水管道 Ships and marine technology – Drainage systems on ships and marine structures – Sanitary drainage, drain piping for gravity system
BS EN ISO 15749-3-2004 船舶和海上技术.船舶和海上结构物的排水系统.真空系统用卫生排水和排水管道 Ships and marine technology – Drainage systems on ships and marine structures – Sanitary drainage, drain piping for vacuum system
BS EN ISO 15874-1-2004 冷热水装置用塑料管道系统.聚丙烯(PP).总则 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – General
BS EN ISO 15874-2-2004 冷热水装置用塑料管道系统.聚丙烯(PP).管 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Pipes
BS EN ISO 15874-3-2004 冷热水装置用塑料管道系统.聚丙烯(PP).配件 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Fittings
BS EN ISO 15874-5-2004 冷热水装置用塑料管道系统.聚丙烯(PP).系统的适用性 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Fitness for purpose of the system
BS EN ISO 15875-1-2004 冷热水装置用塑料管道系统.交联聚乙烯.总则 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – General
BS EN ISO 15875-2-2004 冷热水装置用塑料管道系统.交联聚乙烯.管道 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Pipes
BS EN ISO 15875-3-2004 冷热水装置用塑料管道系统.交联聚乙烯.配件 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Fittings
BS EN ISO 15875-5-2004 冷热水装置用塑料管道系统.交联聚乙烯.系统的适用性 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Fitness for purpose of the system
BS EN ISO 15876-1-2004 冷热水装置用塑料管道系统.聚丁烯.总则 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – General
BS EN ISO 15876-2-2004 冷热水装置用塑料管道系统.聚丁烯.管道 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Pipes
BS EN ISO 15876-3-2004 冷热水装置用塑料管道系统.聚丁烯.配件 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Fittings
BS EN ISO 15876-5-2004 冷热水装置用塑料管道系统.聚丁烯.系统的适用性 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Fitness for purpose of the system
BS EN ISO 15877-1-2004 冷热水装置用塑料管道系统.氯化聚氯乙烯.总则 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – General
BS EN ISO 15877-2-2004 冷热水装置用塑料管道系统.氯化聚氯乙烯.管道 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Pipes
BS EN ISO 15877-3-2004 冷热水装置用塑料管道系统.氯化聚氯乙烯.配件 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Fittings
BS EN ISO 15877-5-2004 冷热水装置用塑料管道系统.氯化聚氯乙烯.系统的适用性 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Fitness for purpose of the system
BS EN ISO 15908-2003 热塑塑料管道系统用胶粘剂.胶粘剂热稳定性测定的试验方法 Adhesives for thermoplastic piping systems – Test method for the determination of thermal stability of adhesives
BS EN ISO 16871-2003 塑料管道系统.塑料管道和配件.直接(自然)风化法 Plastics piping and ducting systems – Plastics pipes and fittings – Method for exposure to direct (natural) weathering
BS EN ISO 21329-2004 石油和天然气工业.管道运输系统.机械连接件的试验程序 Petroleum and natural gas industries – Pipeline transportation systems – Test procedures for mechanical connectors
BS EN ISO 3171-1999 液态石油.自动管道取样 Methods of test for petroleum and its products – BS 2000-476: Petroleum liquids – Automatic pipeline sampling
BS EN ISO 5136-2003 声学.风机和其他鼓风装置吹到管道中的声功率的测定.管道法 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method
BS EN ISO 5167-1-2003 用插入圆截面管道中的压差装置测量流体流量.一般原理和要求 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – General principles and requirements
BS EN ISO 5167-2-2003 用插入圆截面管道中的压差装置测量流体流量.节流孔板 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Orifice plates
BS EN ISO 5167-3-2003 用插入圆截面管道中的压差装置测量流体流量.喷嘴和文杜利喷嘴 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Nozzles and Venturi nozzles
BS EN ISO 5167-4-2003 用插入圆截面管道中的压差装置测量流体流量.文杜利管 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Venturi tubes
BS EN ISO 580-2005 塑料管和管道系统.喷射模铸热塑性配件.热效应直观评估法 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings – Methods for visually assessing the effects of heating
BS EN ISO 6412-1-1995 技术制图.管道的简化表示法.总规则和直角表示法 Technical drawings – Simplified representation of pipelines – General rules and orthogonal representation
BS EN ISO 6412-2-1995 技术制图.管道的简化表示法.第2部分:等角投影 Technical drawings – Simplified representation of pipelines – Isometric projection
BS EN ISO 6412-3-1996 技术制图.管道的简化表示法.第3部分:通风和排放系统终端部件 Technical drawings – Simplified representation of pipelines – Terminal features of ventilation and drainage systems
BS EN ISO 6817-1993 封闭管道中导电液体流量测量.电磁流量计测量法 Measurement of conductive liquid flow in closed conduits – Method using electromagnetic flowmeters
BS EN ISO 7235-2003 声学.管道消音器和气体终端设备的实验室测量步骤.插入损失、流动噪声和总压损失 Acoustics – Laboratory measurement procedures for ducted silencers and air-terminal units – Insertion loss, flow noise and total pressure loss
BS EN ISO 7369-2004 管道.金属软管和软管组件.词汇 Pipework – Metal hoses and hose assemblies – Vocabulary
BS EN ISO 8316-1988 封闭管道内液体流量的测量.容积测量箱的液体收集法 Method of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank
BS EN ISO 8795-2002 用于输送供人消耗用水的塑料管道系统.析出物渗移量的车测定.塑料管道、管件和连接件的析出物渗移量的测定 Plastics piping systems for the transport of water intended for human consumption – Migration assessment – Determination of migration values of plastics pipes and fittings and their joints
BS EN ISO 9080-2003 塑料管道和导管系统.用外推法测定热塑塑料管道的长期静液压强度 Plastics piping and ducting systems – Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS EN ISO 9311-2-2002 热塑性塑料管道系统用胶粘剂.剪切强度的测定 Adhesives for thermoplastic piping systems – Determination of shear strength
BS EN ISO 9311-3-2005 热塑性管道系统用胶粘剂.测定耐内压力性的试验方法 Adhesives for thermoplastic piping systems – Test method for the determination of resistance to internal pressure
BS ISO 10405-2001 石油和天燃气工业.套管和管道的维护和使用 Petroleum and natural gas industries – Care and use of casing and tubing
BS ISO 10790-1999 封闭管道中液体流量的测量.可里奥利计选择、安装和使用的指南(流量、密度和容积流量的测定) Measurement of fluid flow in closed conduits – Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
BS ISO 10838-1-2001 燃气用聚乙烯管道系统的机械管件.标称外径小于或等于63mm的管道用金属管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels – Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 10838-2-2001 燃气用聚乙烯管道系统的机械式管件.标称外径大于63mm的管道用金属管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels – Metal fittings for pipes of nominal outside diameter greater than 63mm
BS ISO 10838-3-2001 燃气用聚乙烯管道系统的机械式管件.标称外径小于或等于63mm的管道用热塑性塑料管件 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels – Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
BS ISO 10931-1-1997 工业用塑料管道系统.聚氟乙二烯(PVDF).综述 Plastics piping systems for industrial applications – Poly (vinylidene fluoride) – General
BS ISO 10931-2-1997 工业用塑料管道系统.聚氟乙二烯(PVDF).管道 Plastics piping systems for industrial applications – Poly (vinylidene fluoride) – Pipes
BS ISO 10931-3-1997 工业用聚氟乙二烯(PVDF)塑料管道系统.第3部分:配件 Plastics piping systems for industrial applications – Poly (vinylidene fluoride) – Fittings
BS ISO 11563-2003 原油和石油产品.散货运输.实现管道满度的指南 Crude petroleum and petroleum products – Bulk cargo transfer – Guidelines for achieving the fullness of pipelines
BS ISO 13359-1998 封闭管道传导性液体流量的测量.法兰电磁流量计.总长 Measurement of conductive liquid flow in closed conduits – Flanged electromagnetic flowmeters – Overall length
BS ISO 13678-2001 石油和天然气工业.与铸件、管材和管道一起使用的螺纹复合物制件的评价和试验 Petroleum and natural gas industries – Evaluation and testing of thread compounds for use with casing, tubing and line pipe
BS ISO 13679-2003 石油和天然气工业.套管和管道连接的检验规程 Petroleum and natural gas industries – Procedures for testing casing and tubing connections
BS ISO 13953-2001 聚乙烯管道和配件.根据对焊接头对试样的抗拉强度和断裂模式的测定 Polyethelene (PE) pipes and fittings – Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
BS ISO 14164-1999 稳定源排放.管道中气流容积流量比率的测定.自动配置方法 Stationary source emissions – Determination of the volume flowrate of gas streams in ducts – Automated method
BS ISO 14511-2002 封闭管道流体流量测量.热质量流量计 Measurement of fluid flow in closed conduits – Thermal mass flowmeters
BS ISO 14531-1-2003 塑料管道和配件.气体燃料输送用交联聚乙烯(PE-X)管道系统.米制系列.管规范 Plastics pipes and fittings – Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels – Metric series – Specifications – Pipes
BS ISO 14726-1-2000 船舶技术.管道系统容量的识别颜色.主要颜色和媒介 Ships and marine technology. Identification colours for the content of piping systems. Main colours and media
BS ISO 14743-2004 气压传动.热塑性管道用插入式连接件 Pneumatic fluid power – Push-in connectors for thermoplastic tubes
BS ISO 15086-2-2000 液压流体动力.部件和系统液载噪音特性的测定.管道流体声速的测量 Hydraulic fluid power – Determination of fluid-borne noise characteristics of components and systems – Measurement of speed of sound in a fluid in a pipe
BS ISO 15348-2002 管道工程.金属波纹管膨胀节.总则 Pipework – Metal bellows expansion joints – General
BS ISO 15649-2001 石油和天然气工业.管道 Petroleum and natural gas industries – Piping
BS ISO 15741-2002 油漆和清漆.岸上和近海铺设的无腐蚀气体钢管道内侧的减小摩擦涂层 Paints and varnishes – Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
BS ISO 15837-2006 船舶和海上技术.管道系统中使用的有垫圈机械联接件.性能规范 Ships and marine technology – Gasketed mechanical couplings for use in piping systems – Performance specification
BS ISO 15838-2004 船舶与海上技术.管道设施中使用的带密封衬垫的机械耦合配件.性能规范 Ships and marine technology – Fittings for use with gasketed mechanical couplings used in piping applications – Performance specification
BS ISO 19921-2006 船舶和海上技术.带有回弹性和弹性密封件的耐火金属管道组件.试验方法 Ships and marine technology – Fire resistance of metallic pipe components with resilient and elastomeric seals – Test methods
BS ISO 19922-2006 船舶和海上技术.带回弹性和弹性密封件的金属管道组件的耐火性.试验台的要求 Ships and marine technology – Fire resistance of metallic pipe components with resilient and elastomeric seals – Requirements on the test bench
BS ISO 3183-3-1999 石油和天然气工业.管道用钢管的技术交货条件.C级要求的钢管 Petroleum and natural gas industries – Steel pipe for pipelines – Technical delivery conditions – Pipes of requirement class C
BS ISO 4179-2005 压力和非压力管道用球墨铸铁管和配件.水泥灰浆内衬 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
BS ISO 5667-5-2006 水质.取样.从水处理站和管道分配系统采样饮用水的指南 Water quality – Sampling – Guidance on sampling of drinking water from treatment works and piped distribution systems
BS ISO 7278-4-1999 液态烃.动态测量.容积式流量计校验系统.管道校验仪操作者指南 Liquid hydrocarbons – Dynamic measurement – Proving systems for volumetric meters – Guide for operators of pipe provers
BS ISO 7967-4-2005 往复式内燃机.零部件和系统词汇.增压及进/排气管道系统 Reciprocating internal combustion engines – Vocabulary of components and systems – Pressure charging and air/exhaust gas ducting systems
BS ISO 9349-2005 预绝缘球墨铸铁管道系统 Preinsulated ductile iron pipeline systems
BS ISO 9631-2004 橡胶密封件.温度为110℃及以下的热水供给、排水和污水管道用连接环.材料规范 Rubber seals – Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C – Specifications for the material
BS ISO TR 12764-1998 封闭管道中液体流量的测量.在圆形截面导管中插入涡流流量计来测量流率 Measurement of fluid flow in closed conduits – Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
BS ISO TR 3313-1998 密封管道中液体流量的测量.脉动流动对流量测量仪器影响的指南 Measurement of fluid flow in closed conduits – Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO/TR 12765-1999 封闭式管道中液体流量的测量.使用转接-时间超声流量计法 Measurement of fluid flow in closed conduits – Methods using transit-time ultrasonic flowmeters
BS M 62-1987 轴线调准的液压系统管道的夹紧装置的设计和评定试验规范 Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment – Metric series
BS M 64-1987 流体管道装置”Ω”形卡箍(鞍形夹)尺寸规范 Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations
BS MA 49-1986 船舶管道系统用碳钢管的摘要和应用 Summary and application of carbon steel tubes for marine pipework systems
BS MA 60-1986 船舶管道系统用铜及铜合金管摘要和应用 Summary and application of copper and copper alloy tubes for ships’ pipework systems
BS MA 9-1970 柴油机和锅炉上风烟道用废气管道法兰、螺栓和密封垫 Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes
CP 312-1-1973 塑料管道(热塑材料)实用规程.第1部分:一般原理和材料选择 Code of practice for plastics pipework (thermoplastics material). General principles and choice of material
CP 312-2-1973 塑料管道(热塑材料)实用规程.第2部分:压力液体输送用非增塑PVC管 Code of practice for plastics pipework (thermoplastics material). Unplasticized PVC pipework for the conveyance of liquids under pressure
DD ENV 12097-1997 建筑物的通风设备.管道系统.便于维护管道系统的管道系统部件要求 Ventilation for buildings. Ductwork. Requirements for ductwork components to facilitate maintenance of ductwork systems
DD ENV 12108-2001 塑料管道系统.建筑物内部的人用冷热水压力管道系统的安装指南 Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
DD ENV 1329-2-2001 建筑物内粪水和废物排放的塑料管道系统(低温和高温).未增塑聚氯乙烯(PVC-U).符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
DD ENV 13801-2001 建筑物内土壤和废物排放用塑料管道系统(低和高温).热塑性.安装推荐方法 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
DD ENV 1401-2-2001 非压力地下废水排放和污水系统的塑料管道系统.非增塑聚氯乙烯.符合性评定指南 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity
DD ENV 1401-3-2001 非压力地下废水和排水系统的塑料管道系统.非增塑聚氯乙烯(PVC-U).安装指南 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for installation
DD ENV 1451-2-2001 建筑物内粪水和废物排放的塑料管道系统(低温和高温).聚丙烯.符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
DD ENV 1452-6-2002 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).安装指南 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for installation
DD ENV 1452-7-2001 供水用塑料管道系统.未增塑聚氯乙烯.合格评定指南 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
DD ENV 1453-2-2001 建筑物内的粪水和废物排放用的带结构壁管道的塑料管道系统(低温和高温).非增塑聚氯乙烯.一致性评价指南 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
DD ENV 1455-2-2001 建筑物内粪和废物排放的塑料管道系统(低温和高温).丙烯腈-丁二烯-苯乙烯共聚物.符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS). Guidance for the assessment of conformity
DD ENV 1519-2-2001 建筑物内土壤和废物排放的塑料管道系统(低温和高温).聚乙烯.符合性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
DD ENV 1565-2-2001 建筑结构内低温和高温粪水和废物排放的塑料管道系统.苯乙烯共聚物.符合性评价指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for the assessment of conformity
DD ENV 1566-2-2001 建筑结构内低温和高温土壤和废物排放的塑料管道系统.聚氯乙烯.一致性评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity
DD ENV 1852-2-2001 非压力地下废水排放和污水系统的塑料管道系统.聚丙烯.符合性评定指南 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity
DD ENV 1998-4-1999 欧洲规程8:防地震结构的设计条例.贮仓、水箱和管道 Eurocode 8: Design provisions for earthquake resistance of structures. Silos, tanks and pipelines
KIT 110-2002 金属工业管道系统 Metallic industrial piping kit
KIT 142-2004 管道实用规程汇编 Code of practice for pipelines kit

Related News

  • * 暂无相关文章
العربيةБългарски简体中文繁體中文DanskNederlandsEnglishFrançaisDeutschBahasa IndonesiaItaliano日本語한국어LatinPortuguêsРусскийEspañolதமிழ்ไทยTürkçe