DIN 912 Monel 400 Hexagon Socket Head Cap Screw
Short Description
Model No.: DIN-912-Monel-400-Hexagon-Socket-Head-Cap-Screw
China Hexagon Socket Head Cap Screw Manufacturer www.steeljrv.com offers DIN 912 Monel 400 Hexagon Socket Head Cap Screw.
Key Specifications / Features
- Type: Monel 400 Hexagon Socket Head Cap Screw
- Material: Monel 400 (UNS N04400/Alloy 2.4360)
- Standard: DIN 912/ISO 4762
- Size: M16
Chemical Composition % of Monel 400 (UNS N04400/Alloy 2.4360) Socket Cap Screw
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Mechanical Properties of Monel 400 (UNS N04400/Alloy 2.4360) Socket Cap Screw
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Equivalent Grades of Monel 400 (UNS N04400/Alloy 2.4360) Socket Cap Screw
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
China Hexagon Socket Head Cap Screw Manufacturer www.steeljrv.com offers DIN 912 Monel 400 Hexagon Socket Head Cap Screw.
Socket Cap Screws to DIN 912 are often referred to as Allen head bolts.
They host a hexagonal recess and are driven using an insert bit or a hex wrench, making the screws more efficient than the slotted screw products as the hex socket drive has more resistance to cam out and can be used with power drivers to enable faster installation.
Higher torque is able to be achieved with the use of this socket head too.
Their cylindrical head is most commonly found in high strength fasteners using the likes of 12.9 grade steel and is used in demanding applications. They are also available in A2 and A4 stainless steel.
Thread diameters available range from M1.4 to M80, with larger diameters and lengths available to order. UNC, UNF, BSW and BSF.
Dimensions Of Hexagon Socket Head Cap Screws – DIN 912
| Socket Cap Screw – DIN 912 | ||||||
| Thread Diameter | D2(mm) | K Max (mm) | T Min (mm) | S (mm) | Pitch | Available Lengths |
| M1.4 | 2.6. | 1.4 | 0.6 | 1.3 | 0.3 | From 2mm |
| M1.6 | 3 | 1.6 | 0.7 | 1.5 | 0.35 | From 3mm |
| M1.8 | – | – | – | – | 0.35 | From 3mm |
| M2 | 3.8 | 2 | 1 | 1.5 | 0.4 | From 3mm |
| M2.5 | 4.5 | 2.5 | 1.1 | 2 | 0.45 | From 3mm |
| M3 | 5.5 | 3 | 1.3 | 2.5 | 0.5 | From 3mm |
| M3.5 | 6 | 3.5 | 1.6 | 2.5 | 0.6 | From 5mm |
| M4 | 7 | 4 | 2 | 3 | 0.7 | From 4mm |
| M5 | 8.5 | 5 | 2.5 | 4 | 0.8 | From 5mm |
| M6 | 10 | 6 | 3 | 5 | 1 | From 5mm |
| M7 | 11 | – | – | 5 | 1 | From 16mm |
| M8 | 13 | 8 | 4 | 6 | 1.25 | From 5mm |
| M10 | 16 | 10 | 5 | 8 | 1.5 | From 8mm |
| M12 | 18 | 12 | 6 | 10 | 1.75 | From 8mm |
| M14 | 21 | 14 | 7 | 12 | 2 | From 20mm |
| M16 | 24 | 16 | 8 | 14 | 2 | From 20mm |
| M18 | 27 | 18 | 9 | 14 | 2.5 | From 20mm |
| M20 | 30 | 20 | 10 | 17 | 2.5 | From 20mm |
