German pipe standards (DIN pipe standards)

20211002025828 46382 - German pipe standards (DIN pipe standards)

German pipe standards (DIN pipe standards)

Number Chinese name English name
DIN 11481-1981 乳品机械.乳品场运输车辆用管道.安装和绝热 Dairy machines; pipelines for rolling stock in dairies; installation and insulation
DIN 11832-1-1990 农场和牲畜饲养设备.输送液态粪肥的管道用阀门管件.第1部分:最大1巴的静压力闸阀 Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
DIN 1185-1-1973 排水.管道排水、明渠排水和底层土壤改良的地下水控制.一般说明和特殊情况 Drainage; Control of Sub-surface Water Management by Draining with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; General Instructions and Special Cases
DIN 1185-2-1973 排水.管道排水.明渠排水和底层土壤改良的地下水控制.规划和计量尺寸的重要数据 Drainage; Control of Sub-surface Water Management by Drainage with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; Important Data for Planning and Dimensioning
DIN 1185-3-1973 排水.管道排水.明渠排水和底层土壤改良的地下水控制.结构 Drainage; Control of Sub-surface Water Management by Drainage with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; Construction
DIN 1185-4-1973 排水.管道排水.明渠排水和底层土壤改良的地下水控制.设计和“完工”图纸 Drainage; Control of Sub-Surface Water Management by Drainage with Pipes, Open-Ditch Drainage and Amelioration of the Subsoil; Design and “As Completed” Drawings
DIN 1185-5-1973 排水.管道排水.明渠排水和底层土壤改良的地下水控制.保养 Drainage; Control of Sub-Surface Water Management by Drainage with Pipes, Open-Ditch Drainage and Amelioration of the Subsoil; Maintenance
DIN 14365-2-1986 公称压力 16 的多用途三通管道.第2部分:要求、检验 Multi purpose branch pipes for nominal pressure 16; requirements, testing
DIN 14461-5-1984 与干式灭火上升总管道连接的输送阀装置.PN16救火软管阀 Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16
DIN 14463-3-2003 消防用水设备.遥控注水和排水装置.地3部分:”湿/干”和”干”灭火管道系统PN16通风阀 Water systems for fire extinguishing – Filling and draining devices operated by remote control – Part 3: Valves for ventilation PN 16 of fire extinguishing pipe systems “wet/dry” and “dry”
DIN 16450-1994 未增朔聚氯乙烯压力管道的套管接头.符号 Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols
DIN 16831-5-1999 聚丁烯(PB)制压力管道用管连接件和零件.PB125.第5部分:一般质量要求、试验 Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 – Part 5: General quality requirements, testing
DIN 16831-6-2003 管道连接件和压力管用聚丁烯(PB)元件.PB 125. 第6部分:电阻焊管件.尺寸 Pipe joints and components of polybuten (PB) for pipes under pressure – PB 125 – Part 6: Fittings for resistance-welding; Dimensions
DIN 16831-7-2004 压力管道用聚丁烯(PB)管子接头和元件.PB125.第7部分:承插焊接用法兰接头、法兰和密封环.尺寸 Pipe joints and components of polybutene (PB) for pipes under pressure – PB 125 – Part 7: Flange adapters, flanges, sealing rings for socket welding, dimensions
DIN 16832-2-2002 加压管道用氯化的聚氯乙烯管连接件和部件.PVC-C 200.第2部分:一般质量试验要求 Pipe joints and components of chlorinated poly(vinyl chloride) (PVC-C) for pipes under pressure – PVC-C 200 – Part 2: General quality requirements, testing
DIN 16867-1982 化工管路用玻璃纤维增强式聚酯树脂管道、配件和接头.交货技术条件 Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions
DIN 16872-1993 热塑性塑料管道用管接头组件.玻璃纤维增强的聚酯树脂(UP-GE)法兰.尺寸 Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions
DIN 16874-2000 电缆输送管道用高密度聚乙烯(PE-HD)管道和配件.尺寸和技术交货条件 Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting – Dimensions and technical delivery conditions
DIN 16876-2000 地下管道用高密度聚乙烯(PE-HD)管道和配件.尺寸和交货技术条件 Pipes and fittings of high-density polyethylene (PE-HD) for buried ducting – Dimensions and technical delivery conditions
DIN 16888-1-1989 热塑性塑料管道化学阻抗的测定.第1部分:聚烯烃管道 Determination of chemical resistance of thermoplastics pipes; polyolefin pipes
DIN 16888-2-1991 热塑性塑料管道化学阻抗的测定.第2部分:未增塑聚氯乙烯(PVC-U)管道 Determination of chemical resistance of thermoplastics pipes; unplasticized polyvinyl chloride (PVC-U) pipes
DIN 16889-1-1989 热塑性塑料管道化学阻抗的测定.第1部分:聚烯烃管道 Determination of the chemical resistance factor for thermoplastics pipes; polyolefin pipes
DIN 16928-1979 热塑性塑料管道.管接头、管道部件、管道敷设.一般说明 Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions
DIN 16962-1-1980 1型和2型聚丙烯压力管道用管接头和零组件.对焊用弓形结构弯头.尺寸 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions
DIN 16962-10-1989 1型、2型和3型的聚丙烯压力管道用管道连接组件和管道配件.第10部分:对焊用喷射模塑配件尺寸 Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions
DIN 16962-11-1980 1型和2型聚丙烯压力管道用管接头和零组件.用于对焊的车削和压制减径管套.尺寸 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
DIN 16962-12-1999 聚丙烯(PP)制压力管道用管连接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸缘接头、法兰、密 Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 – Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions
DIN 16962-13-1987 1型和2型聚丙烯压力管道用管连接件和接头.管接头.尺寸 Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions
DIN 16962-2-1983 1型和2型聚丙烯压力管道用管接头组件和接头.用对焊的分段嵌入和减颈方法制造的T型管及支管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
DIN 16962-3-1980 1型和2型聚丙烯压力管道用管接头和零组件.对焊用管成形弯头.尺寸 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions
DIN 16962-4-1988 1型和2型聚丙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
DIN 16962-5-2000 聚丙烯压力管道用管连接件和零件.PP-H100,PP-B80,PP-R80.第5部分:一般质量要求.试验 Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 – Part 5: General quality requirements, testing
DIN 16962-6-1980 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑弯头.尺寸 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbowsfor Socket-welding, Dimensions
DIN 16962-7-1980 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑三通.尺寸 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
DIN 16962-8-1980 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑管套和管帽.尺寸 Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
DIN 16962-9-1983 1型和2型聚丙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16963-1-1980 .1型和2型高密度聚乙烯压力管道用管连接件.对焊用弓形结构的管子弯头.尺寸 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions
DIN 16963-10-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑套筒与帽盖.尺寸 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions
DIN 16963-11-1999 聚乙烯(PE)制压力管道用管连接件和零件.PE 80和PE 100.第11部分:承口焊接用凸缘接头、法兰、密封圈.尺寸 Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 – Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions
DIN 16963-13-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.对焊用车削的和压制的缩径承接件.尺寸 Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions
DIN 16963-14-1983 1型和2型高密度聚乙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions
DIN 16963-15-1987 高密度聚乙烯压力管道用管连接件和接头.管接头.尺寸 Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions
DIN 16963-2-1983 1型和2型高密度聚乙烯压力管道用管接头组件和配件.用对焊的分段嵌入和缩颈方法制造的T型管及支管.尺寸 Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions
DIN 16963-3-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.对焊用弯管.尺寸 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions
DIN 16963-4-1988 高密度聚乙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions
DIN 16963-5-1999 加压管道 PE 80 和 PE 100用聚乙烯管道连接件和部件.第5部分:一般质量要求和实验 Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 – Part 5: General quality requirements, testing
DIN 16963-6-1989 高密度聚乙烯压力管用管道连接组件和管道配件.第6部分:对焊用喷射模塑配件尺寸 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions
DIN 16963-7-1989 高密度聚乙烯压力管道用管道连接组件和管道配件.第7部分:电阻焊接配件尺寸 Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions
DIN 16963-8-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑弯管.尺寸 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions
DIN 16963-9-1980 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑三通管件.尺寸 Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions
DIN 16966-2-1982 玻璃纤维增强式聚酯树脂管道配件和接头.弯管.尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions
DIN 16966-7-1995 玻璃纤维增强聚酯树脂管道连接件及其组件.第7部分:套筒、法兰、法兰连接和对接件.一般质量要求和试验方法 Pipe joints and their elements of glass fibre reinforced polyester resins – Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods
DIN 16970-1970 硬聚氯乙烯(PVC)制管子和管道零件粘接用胶粘剂.一般质量要求和检验 Adhesives for Bonding Pipes and Pipe System Elements of Rigid PVC; General Quality Requirements and Testings
DIN 18319-2000 建筑工程承包条例.第C部分:建筑工程通用技术规范.管道掘进工程 Contract procedures for building works – Part C: General technical specifications for building works; Pipe drilling works
DIN 19531-10-1999 建筑物污水和污物排放系统用未增塑聚氯乙烯(PVC-U)套管道和配件.第10部分:燃烧性能、质量控制和安装的推荐 Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings – Part 10: Fire behaviour, quality control and installation recommendations
DIN 19537-3-1990 排污系统用高密度预制聚乙烯管道检修孔.第3部分:尺寸和交货技术条件 Prefabricated high density polyethylene (PE-HD) manholes for use in sewerage systems; dimensions and technical delivery conditions
DIN 19538-10-1999 建筑物内耐热污水和污物排放系统用氯化的聚氯乙烯(PVC-C)管道和配件.第10部分:燃烧性能、质量控制和安装的 Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot-water resistant waste and soil discharge systems inside buildings – Part 10: Fire behaviour, quality control and installation recommendations
DIN 19558-2002 废水处理厂.储罐出口装置、溢水口、浮渣档板和浸没式排水管道.建造原则、主要尺寸和布局 Wastewater treatment plants – Outlet installations, weir and scum baffle, submerged effluent pipes in tanks – Construction principles, main dimensions, layout
DIN 19559-1-1983 明渠和重力管道中废水流量的测量.一般信息 Measurement of flow of waste water in open channels and gravity conduits; general information
DIN 19559-2-1983 明渠和重力管道中废水流量的测量.文丘里氏水槽 Measurement of flow of waste water in open channels and gravity conduits; venturi flumes
DIN 19565-5-1990 排污系统用高密度预制聚乙烯管道检修孔.第5部分:尺寸和交货技术条件 Prefabricated glass fibre reinforced plastic (UP-GF) manholes for use in sewerage systems; dimensions and technical delivery conditions
DIN 19658-2-1994 灌溉系统用可卷绕聚乙烯(PE)管道和软管.第2部分:形状固定的织物芯层软管.尺寸和供货技术条件 Polyethylene (PE) coiling pipes and hoses for irrigation systems – Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions
DIN 19666-2001 排水管道和渗滤管道.一般要求 Drain pipes and percolation pipes – General requirements
DIN 19667-1991 废碴埋填的污水排放管道系统.设计、建造和使用 Drainage of landfills; code of practice for design, construction and operation
DIN 19802-1977 石棉水泥压力管道用铸铁专用铸件.套管头 Cast iron special castings for asbestos cement pressure pipelines; spigot ends
DIN 19803-1977 石棉水泥压力管道的铸铁专用铸件.带法兰套管 Cast iron special castings for asbestos cement pressure pipelines; flanged spigots
DIN 19804-1977 石棉水泥压力管道用铸铁专用铸件.锥形件 Cast iron special castings for asbestos cement pressure pipelines; tapers
DIN 19805-1977 石棉水泥压力管道用铸铁的专用铸件.弯管头 Cast iron special castings for asbestos cement pressure pipe lines; bends
DIN 19806-1977 石棉水泥压力管道专用铸铁铸件.支管 Cast iron special castings for asbestos cement pressure pipelines; branches
DIN 19807-1977 石棉水泥压力管道的专用铁铸件.铸铁管的连接件 Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes
DIN 19808-1977 石棉水泥压力管道用铸铁专用铸件.管堵 Cast iron special castings for asbestos cement pressure pipelines; plugs
DIN 19850-1-1996 污水管道用纤维水泥管和配件件.第1部分:管,支管和弯头尺寸 Fibre cement pipes and fittings for sewers – Part 1: Dimensions of pipes, branches and bends
DIN 1998-1978 公共区域管道设施的布置.计划原则 Placing of service conduits in public areas; directives for planning
DIN 20002-1-1989 矿山管道.带活动法兰和平凸缘的钢管.标称压力10 Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 10
DIN 20002-2-1989 矿山管道.带活动法兰和凸缘的钢管.标称压力6 Pipelines for mining; steel tubes with loose flanges and collars; projection and recess; nominal pressure 6
DIN 20002-3-1989 矿山用管道.带活动法兰和平凸缘的钢管.标称压力40 Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 40
DIN 20006-1989 采矿用管道.符合DIN20002的钢管材和符合DIN20003的连接件用密封圈 Pipeline for mining; sealings for steel tubes according to DIN 20002 and fittings according to DIN 20003
DIN 2403-1984 按输送流体区分的管道标志 Identification of pipelines according to the fluid conveyed
DIN 2404-1942 加热系统管道的标示颜色 Identification Colour Code for Heating System Pipelines
DIN 24118-1984 建筑机械和建筑材料机械.混凝土输送管道.尺寸 Construction machines and machines for building materials; concrete delivery pipelines; dimensions
DIN 24190-1998 通风和空调设备.折叠的和焊接的矩形金属薄板管道 Ventilation and air conditioning – Folded and welded rectangular sheet metal ducts
DIN 24192 Bb.1-1985 通风设备管道.薄板金属管道和薄板金属管道付件的连接.轻型连接结构的示例 Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components; examples of light joint constructions
DIN 24192-1985 通风设备管道.薄板金属管道和薄板金属部件的连接 Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components
DIN 24193-1-1988 通风设备用管道.法兰.系列1.角钢法兰 Ducting for ventilation equipment; flanges; series 1; angle flanges
DIN 24193-2-1988 通风设备用管道.法兰.系列2.平面法兰和角钢法兰 Ducting for ventilation equipment; flanges; series 2; flat and angle flanges
DIN 24193-3-1988 通风设备用管道.法兰.系列3.平面法兰和角钢法兰 Ducting for ventilation equipment; flanges; series 3; flat and angle flanges
DIN 2429-1-1988 工程图纸的管道部件符号表示法.第1部分:基本要求 Symbolic representation of pipework components for use on engineering drawings; basic requirements
DIN 2429-2 Bb.1-1988 工程图纸的管道部件符号表示法.功能表示法.第2 Bb 1部分:流量开通或关闭示例 Symbolic representation of pipework components on technical drawings; functional representation; examples for the representation of open or shut-off flow
DIN 2429-2-1988 工程图纸的管道部件符号表示法.第2部分:功能表示法 Symbolic representation of pipework components on engineering drawings; functional representation
DIN 2430-1-2001 清管装置管道.第1部分:管和肘管 Piping for pigging systems – Part 1: Pipes and elbows
DIN 2430-2-2002 清管装置管道.第2部分:管连接件 Piping for pigging systems – Part 2: Piping connections
DIN 2430-3-2002 清管装置管道.第3部分:使用前测试 Piping for pigging systems – Part 3: Testing prior to commissioning
DIN 2470-1-1987 允许工作压力16巴以下的气体输送用钢管道.管道和配件 Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings
DIN 25423 Bb.1-1987 空气中放射性监控的取样.根据估计值对取样空气管道和设施中微粒损耗进行计算的说明 Sampling procedures for the monitoring of radioactivity in air; instructions for the calculation of particle loss in sampling air ducts and instructions on estimates of errors due to anisokinetic sampling
DIN 25423-2-2000 大气放射性监控的取样方法.第2部分:从管道和烟囱取样的特殊要求 Sampling procedures for the monitoring of radioactivity in air – Part 2: Special requirements for sampling from air ducts and stacks
DIN 25427-1-1977 防γ射线辐射的混凝土屏蔽墙中双弯充气管道的设计.术语和条件 Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation; Terms and Conditions
DIN 25432-1991 穿过反应堆安全壳的管道贯穿件 Pipe penetrations through the reactor containment
DIN 2559-3-1990 焊缝预加工.第3部分:焊接管道圆周焊缝的内径配合 Preparation of welds; matching of inside diameters for circumferential welds on welded pipes
DIN 27202-9-2006 铁路车辆状态.车辆的上层结构和专用设备.第9部分:装有对水有害物质的装置和易燃物质用容器和管道系统 State of railway vehicles – Superstructure and special equipment of vehicles – Part 9: Installations which contain substances dangerous to water as well as tanks and pipe systems for flammable substances
DIN 2848-2002 带衬里的法兰钢管和法兰钢管道或法兰铸铁配件.PN 10、PN 25 和 PN 40 Flanged steel pipes and flanged steel or cast iron fittings with lining – PN 10, PN 25 and PN 40
DIN 28601-2000 延性铸铁管道和配件.螺纹套管接头.组件、套管、螺丝环、密封环和滑动环 Ductile iron pipes and fittings – Screwed socket joints – Assembly, sockets, screw rings, sealing rings and slip rings
DIN 28603-2002 可锻铸铁管道和配件.插入式连接件.测量、管座和密封垫 Ductile iron pipes and fittings – Push-in joints – Survey, sockets and gaskets
DIN 2873-2002 带玻璃衬里的法兰连接管道和法兰钢.PN 10和PN 25 Flanged fitting pipes and flanged steel glass lined – PN 10 and PN 25
DIN 2874-2002 带聚四氟乙烯或PFA衬里的钢制法兰管道和钢制与铸铁法兰配件.技术规范 Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA – Technical specifications
DIN 2875-2002 带硬质或软质橡胶衬里的法兰钢管道和法兰钢配件.技术规范 Flanged steel pipes and flanged steel fittings with hard or soft rubber lining – Technical specifications
DIN 2876-2002 带玻璃衬里的法兰钢管道和法兰钢配件.技术规范 Flanged steel pipes and flanged steel fittings glass lined – Technical specifications
DIN 30658-1-1998 地下煤气管道接头附加密封材料.第1部分:已密封煤气管道附加密封用塑料薄膜和织物衬套.安全要求和试验 Materials for the subsequent sealing of joints in underground gas mains – Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
DIN 30658-2-1999 地下煤气管道用后续密封材料.第2部分:地下煤气管道接头用后续密封材料.安全要求和试验 Materials for the subsequent sealing of underground gas mains – Part 2: Materials for the subsequent sealing of joints in underground gas mains; safety requirements and testing
DIN 30672-2000 持续工作温度不超过50℃的地下和水下管道外部有机防腐涂层.带材和可收缩材料 External organic coatings for the corrosion protection of buried and immersed pipelines for continuous operating temperatures up to 50 °C – Tapes and shrinkable materials
DIN 30674-3-2001 护套式可塑铸铁管道.第3部分:带护套保护的镀锌层 Sheathing ductile cast iron pipes – Part 3: Zinc coating with protective sheathing
DIN 30675-1-1992 地下敷设的管道的外层防腐.钢管的防腐措施 External corrosion protection of buried pipes; corrosion protection systems for steel pipes
DIN 30675-2-1993 掩埋管道的外部防腐.球墨铸铁管的防腐蚀系统 External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes
DIN 30677-1-1991 埋设管道的腐蚀保护.第1部分:公称要求的涂层 Corrosion protection of burried valves; coating for normal requirement
DIN 32-3-1981 包装.预包装的包装手段.第3部分:管道用盒量度的测定 Packaging; means of packaging for pre-packages; determination of measures for boxes for tubes
DIN 3280-1988 家用供水管道的阀门.公称压力 PN 10 以下的锥形连接管.概述 Valves for domestic water supply; tapered unions up to PN 10; survey
DIN 3281-1988 家用供水管道的阀门.公称压力10的锥形管子接头.概述 Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
DIN 3283-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带内螺纹的废水排放连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
DIN 3284-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带外螺纹的连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
DIN 3285-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
DIN 3287-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.管路用带螺纹的连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
DIN 3289-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的锥形管子接头 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
DIN 3291-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
DIN 3386-1973 内部气体设施管道的过滤器 Filters in interior gas-installation pipes
DIN 3387-1-1991 第1部分:金属煤气管道用可拆卸的无螺纹管连接件 Separable unthreaded pipe connections for metal gas pipes
DIN 3387-2-1991 煤气管道用带法兰接头的金属管道管连接件 Tube connections for metallic tubes having flanged ends for gas pipes
DIN 3444-1997 带焊接端和螺纹端的管道部件防护盖 Protective caps for pipe fittings with welded and threaded ends
DIN 3535-6-1999 供气用密封垫.第6部分:气阀、煤气设备和煤气主管道用基于合成纤维、石墨或聚四氟乙烯的密封垫材料 Gaskets for gas supply – Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
DIN 3536-1994 室内设备、煤气分配和煤气输送管道的煤气阀用润滑剂 Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines
DIN 3543-4-1984 高密度管道用高密度聚乙烯排放阀.尺寸 High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN 3581-1990 气体管道.1号规格的管阀箱 Gas pipelines; size 1 valve box
DIN 3582-1990 气体管道.2号规格的管阀箱 Gas pipelines; size 2 valve box
DIN 3583-1990 气体管道.3号规格的管阀箱 Gas pipelines; size 3 valve box
DIN 3584-1990 气体管道.4号规格的管阀箱 Gas pipelines; size 4 valve box
DIN 3585-1990 气体管道.5号规格的管阀箱 Gas pipelines; size 5 valve box
DIN 4000-16-1988 第16部分:管道配件用物品特性表格设计 Tabular layouts of article characteristics for pipeline fittings
DIN 4034-10-1995 预制混凝土和钢筋混凝土井筒和检验室.第10部分:地下敷设排水管道用砖砌井筒底部.要求和检验 Prefabricated concrete and reinforced concrete manholes and inspection chambers – Part 10: Brick manhole bases for buried drains and sewers; requirements and testing
DIN 4065-1974 气体管道指示标签 Gas pipelines indicating labels
DIN 4262-1-2001 土木工程地下排水用管道系统.第1部分:塑料管 Piping systems for civil engineering subsoil drainage – Part 1: Plastic pipes
DIN 4263-1991 给排水工程的污水管、排水管和管道的形状、尺寸和几何值 Shapes, dimensions and geometrical values of sewers, drains and pipelines for water and waste water engineering
DIN 43614-1-1979 压力气体管道的转换开关装置和控制装置..铜导管 Switchgear and controlgear conduits for pressure-gas pipelines; copper conduits
DIN 43614-2-1980 开关装置和控制装置.压缩空气管道用管.不锈钢管 Switchgear and controlgear; conduits for pressure-gas pipelines, stainless steel conduits
DIN 45635-62-1989 机器排放的空气传播噪声的测量.第62部分:包洛面法.混凝土砖块、板条、管道和预制件生产用机器和设备 Measurement of airborne noise emitted by machines; enveloping surface method; machines and equipment for the manufacture of concrete blocks, slabs, pipes and prefabricated elements
DIN 4721-2001 地板热水供热系统和散热器连接用塑料管道系统.高耐温性聚乙烯 Plastic piping systems for warm water floor heating systems and radiator connecting – Polyethylene of raised temperature resistance (PE-RT)
DIN 4724-2001 热水地板供热系统用塑料管道系统和辐射管道连接,中等密度的交叉链接的聚乙烯 Plastic piping systems for warm water floor heating systems and radiator pipe connecting – Crosslinked polyethylene of medium density (PE-MDX)
DIN 4725-200-2001 地板供热.系统和元件.第200部分:管道覆盖层大于0.065M的热输出测定 Floor heating, systems and components – Part 200: Determination of the thermal output, pipe coverings larger than 0,065 m
DIN 4726-2000 热水地板加热系统和散热器管道连接.塑料管道 Warm water floor heating systems and radiator pipe connecting – Piping of plastic materials
DIN 4740-2-1987 通风设备.无增塑的聚氯乙烯垂直管道.弯管配件.最小壁厚 Ventilation plant; unplasticized polyvinylchloride (PVC-U) uptakes; pipe fittings, bends; minimum wall thickness
DIN 4740-5-1988 通风设备.无增塑剂的聚氯乙烯非加固管道.第5部分:最小壁厚 Ventilation plant; unplasticized polyvinylchloride (PVC-U) pipes; non-reinforced ducts; minimum wall thickness
DIN 4741-2-1987 通风设备.Ⅰ型聚丙烯(PP)垂直管道.弯管配件.最小壁厚 Ventilation plant; type 1 polypropylene (PP) uptakes; pipe fittings, bends; minimum wall thicknesses
DIN 4741-5-1988 通风设备.聚丙乙烯(PP)Ⅰ型非加固管道.第5部分:最小壁厚 Ventilation plant; polypropylene (PP) pipes, type 1; non-reinforced ducts; minimum wall thickness
DIN 4815-3-1985 液化气用软管.运输车辆用加气和排空用软管管道 Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles
DIN 4815-5-1988 液化气用软管.车辆液化气管道用软管接合器.第5部分:安全要求概念、试验、标记 Hoses for LPG; coupling for LPG hose assemblies in vehicles; concepts safety requirements, tests, marking
DIN 50927-1985 对仪器.容器和管道内表面的电化学防腐的计划与实施(内部防护) Planning and application of electrochemical corrosion protection of internal surfaces of apparatus, containers and tubes (internal protection)
DIN 50929-3-1985 金属腐蚀.承受外部腐蚀时金属材料腐蚀的概率.掩埋的和水中的管道和结构零组件构件 Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components
DIN 53769-1-1988 玻璃纤维增强塑料管道检验.第1部分:B型管道配件纵向剪切强度的测定 Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
DIN 53769-2-1986 玻璃纤维增加塑料管道检验.长期静液压试验 Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
DIN 53769-6-1989 玻璃纤维增强塑料管道检验.第6部分:受内压脉动作用的管道和配件 Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure
DIN 54141-1-1982 无损检验.管道和管子的涡流检验.用单频率法和同心试验线圈检验的概要 Non-destructive testing; Eddy current testing of pipes and tubes; General remarks on testing using concentric test coils and the single-frequency method
DIN 54141-2-1982 无损检验.管道和管子的涡流检验.用同心试验线圈的涡流检验系统性能测定与校正的基准方法 Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
DIN 54141-3-1987 无损检验.管道和管子的涡流检验.程序 Non-destructive testing; eddy current testing of pipes and tubes; procedure
DIN 54841-3-2000 地下电缆和管道用塑料报警装置.第3部分:可检测的表 Plastic warning devices for buried cables and pipelines – Part 3: Detectable table
DIN 54841-5-2000 地下电缆和管道用塑料报警装置.第5部分:电缆覆层 Plastic warning devices for underground cables and pipelines – Part 5: Cable cover
DIN 58809-1972 骨钉器械.管道扩孔器 Instruments for intramedullary nailing; intermedullary canal reamer
DIN 65178-1-1985 航空航天.流体管道结构和安装.概述和定义 Aerospace; configuration and installation of fluid pipelines; survey and definitions
DIN 65178-2-1985 航空航天.液体管道的构造形式和安装.管道组件、设计 Aerospace; configuration and installation of fluid pipelines; tube assemblies, design
DIN 65178-3-1985 航空航天.液体管道的构造形式和安装.管道组件.制造 Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture
DIN 65178-6-1987 航空航天.液体管道的构造和设计.软管组件、制造 Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture
DIN 6620-2-1981 矿物油地上存贮用成排容器 .连接管道 Battery tanks for aboveground storage of mineral-oils, connection lines
DIN 6654-1996 风动管道系统.图形符号 Pneumatic tube conveyor systems – Graphic symbols
DIN 6656-1997 风动管道系统.风动管道系统钢和不锈钢传送管、传送管弯头和套管 Pneumatic tube system – Conveyor tubes, conveyor tube bends and sleeves for pneumatic tubes lines in steel and stainless steel
DIN 6660-1996 风动管道系统.无增塑剂聚氯乙烯(硬聚氯乙烯)传送管,传送管弯头和接头 Pneumatic tube systems – Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U)
DIN 73365-3-1970 柴油机喷射泵.第3部分:压力管道连接件 Injection pumps for Diesel engines; pressure pipe connections
DIN 74233-1-1991 液压制动系统.制动管道配件.第1部分:制动管道外用配件 Hydraulic braking systems; fittings for brake pipes; male fittings for brake pipes
DIN 74233-2-1991 液压制动系统.制动管道配件.第2部分:制动管道管接螺母 Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes
DIN 74324-1-1996 气动制动设备.聚酰胺管和管道.第1部分:要求和试验 Air braking systems – Thermoplastic tubing – Part 1: Requirements and tests
DIN 74347-1998 空气制动系统.管道的空气过滤器 Air braking systems – Air filter for pipes
DIN 8063-1-1986 未增塑聚氯乙烯压力管道用管连接组件和接头.承口弯头尺寸 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends
DIN 8063-10-2002 加压管道用未增塑聚氯乙烯的管道连接件和部件.第10部分:管壁支架弯管接头.尺寸 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 10: Wall bracket elbows; Dimensions
DIN 8063-11-1980 未增塑聚氯乙烯(刚性 PVC)压力管道的管道连接和管道配件.第11部分:粘合用基体为铜锌合金(黄铜)的套管尺寸 Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions
DIN 8063-12-1987 未增塑聚氯乙烯压力管道的管连接组件和接头.带法兰的和承口接头的尺寸 Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings
DIN 8063-2-1980 未增塑聚氯乙烯(刚性 PVC)压力管道的管道连接和管道配件.第2部分:粘合用注塑弯头尺寸 Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions
DIN 8063-3-2002 加压管道用未增塑聚氯乙烯的管道连接件和部件.第3部分:管接头:尺寸 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 3: Unions; Dimensions
DIN 8063-4-1983 未增塑聚氯乙烯压力管道用管连接组件和接头.内外螺母、法兰盘、密封件.尺寸 Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions
DIN 8063-5-1999 未增塑聚氯乙烯压力管道用管接头和元件(PVC-U).第5部分:一般质量要求、试验 Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure – Part 5: General quality requirements, testing
DIN 8063-6-2002 非增塑聚氯乙烯压力管道连接件和配件.第6部分:溶剂粘结用压铸弯头.尺寸 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 6: Injection-moulded elbows for solvent cementing; Dimensions
DIN 8063-7-1980 未增塑聚氯乙烯(未增塑 PVC)压力管道的管道连接和管道配件.第2部分:冷粘合注塑三通和支管尺寸 Pipe joints and their elements of unplasticized polyvinylchloride (unplasticized PVC) under pressure; tees and branches of injection moulded for cold welding, dimensions
DIN 8063-8-2002 加压管道用未增塑聚氯乙烯的管道连接件和部件.第8部分:溶剂粘结用喷射模塑套管、帽和管接头.尺寸 Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure – Part 8: Injection-moulded sockets, caps and nipples for solvent cementing; Dimensions
DIN 8063-9-1980 未增塑聚氯乙烯受压管道的管道连接件及其元件.第9部分:冷焊用注塑管节异径尺寸 Pipe joints and their elements for pipes of unplasticized polyvinylchloride (unplasticized PVC) under pressure; sockets reducing of injection moulded for cold welding, dimensions
DIN 8076-1-1984 热塑性塑料压力管道.聚乙烯管道的金属压缩接头.一般质量要求、检验 Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing
DIN 8076-3-1994 热塑性塑料压力管道.第3部分.聚乙烯管道的塑料接头.一般质量要求和试验 Pressure pipelines made from thermoplastics materials – Part 3: Plastic joints for PE pipes; general quality requirements, testing
DIN 85004-9-1997 铜-镍合金管道.第9部分:透视检验总则 Pipelines of copper-nickel-alloys – Part 9: General principles for radiographic testing
DIN 86001-1997 船舶管道.压力等级.试验 Pipelines on ships – Pressure ratings, tests
DIN 86016-1991 船舶用未增塑的聚氯乙烯管道的钢管支架 Pipe brackets of steel for ships pipelines of unplasticized polyvinyl cloride (PVC-U)
DIN 86037-1-1995 铜镍合金管道的活套法兰和焊接凸肩.第1部分:组装 Loose flanges and welding necks for pipes of copper-nickel-alloys – Part 1: Assembly
DIN 86037-2-1995 铜镍合金管道的活套法兰和焊接凸肩.第2部分:焊接凸肩 Loose flanges and welding necks for pipes of copper-nickel-alloys – Part 2: Welding necks
DIN 86037-3-1995 铜镍合金管道的活套法兰和焊接凸肩.第3部分:活套法兰 Loose flanges and welding necks for pipes of copper-nickel-alloys – Part 3: Loose flanges
DIN 86044-1980 船舶排气管道.法兰盘 Exhaust gas lines on ships; flanges
DIN 86072-1992 船用排气管道.密封垫 Exhaust gas lines on ships; gaskets
DIN 86110-1988 船舶维护油箱管道系统.灌装与压力平衡设备.探测管 Ship service tank piping systems; filing and pressure equalizing equipment; sounding pipes
DIN 86125-2001 船用管道.管和管道设备.总则 Pipelines for shipboard use – Pipes and pipeline equipment – Synopsis
DIN 86150-1996 管道焊接套管 Welding sockets for pipes
DIN 86151-1996 船舶操作油箱管道.术语、定义、符号 Ship operation tank pipework – Terms, definitions, symbols
DIN 86287-1999 船舶和海上建筑结构的管道.带插接口和插套的钢管和管接头.铺设和处理 Pipework on ships and marine structures – Steel pipes and fittings with spigot and socket – Laying and treatment
DIN 87344-1976 人工操作用带传输管道系统的遥控传动装置.调定连接用方形孔叉形连杆 Remote control gear with transmission tubing for manual operation; fork links with square hole for setting-up connection
DIN 87346-1976 人工操作用带传输管道系统的遥控传动装置.轴承 Remote control gear with transmission tubing for manual operation; bearings
DIN 87349-1976 人工操作用带传输管道系统的遥控传动装置.伞齿轮传动装置 Remote control gear with transmission tubing for manual operation; bevel gear units
DIN 87373-1976 人工操作用带传输管道系统的遥控传动装置.防水导向轴承 Remote control gear with transmission tubing for manual operation; leading-through bearings, watertight
DIN 8905-1-1983 带密封和半密封压缩机的制冷设备用管道.外径54mm以下.交货技术条件 Tubes for refrigerating systems with hermetic and semi-hermetic compressors; outside diameter up to 54 mm; technical delivery conditions
DIN 8905-3-1983 带密封和半密封压缩机的制冷系统用管道.毛细节流阀的补充交货技术条件 Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
DIN CEN/TS 12200-2-2003 地面上使用的雨水塑料管道系统.未增塑的聚氯乙烯(PVC-U).第2部分:一致性评定指南 Plastics rainwater piping systems for above ground external use – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for the assessment of conformity; German version CEN/TS 12200-2:2003
DIN CEN/TS 12201-7-2003 给水用塑料管道系统.聚乙烯.第7部分:合格评定指南 Plastics piping systems for water supply – Polyethylene (PE) – Part 7: Guidance for the assessment of conformity; German version CEN/TS 12201-7:2003
DIN CEN/TS 12666-2-2006 非压力地下排水和污水管道用塑料管道系统.聚丙烯(PE).第2部分:一致性评估指南.德文版本CEN/TS 12666-2-2005 Plastics piping systems for non-pressure underground drainage and sewerage – Polyethylene (PE) – Part 2: Guidance for the assessment of conformity; German version CEN/TS 12666-2:2005
DIN CEN/TS 13244-7-2003 通用、排水和污水用地下和地上压力系统用塑料管道系统.聚乙烯.第7部分:合格评定指南 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Part 7: Guidance for the assessment of conformity; German version CEN/TS 13244-7:2003
DIN CEN/TS 1456-2-2003 直埋式和地上排水和排污用压力塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:符合性评定指南 Plastics piping systems for buried and above-ground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for the assessment of conformity; German version CEN/TS 1456-2:2003
DIN CEN/TS 14578-2003 给水或排水排污用塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).安装的推荐性实施规 Plastics piping systems for water supply or drainage and sewerage – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) – Recommended practice for installation; German version CEN/TS 14578:2003
DIN CEN/TS 14807-2005 塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).地下GRP-UP管道的结构分析指南 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) – Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004
DIN CEN/TS 1555-7-2003 燃气输送用塑料管道系统.聚乙烯(PE).第7部分:符合性评定指南 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 7: Guidance for the assessment of conformity; German version CEN/TS 1555-7:2003
DIN CEN/TS 1852-3-2005 无压力地下排水和排污塑料管道系统.聚丙烯(PP).第3部分:安装指南 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Part 3: Guidance for installation; German version CEN/TS 1852-3:2003 + A1:2005
DIN EN 10226-1-2004 有压力紧固连接件的管道螺纹.第1部分:锥形外螺纹和平行内螺纹.尺寸、公差和名称与符号 Pipe threads where pressure tight joints are made on the threads – Part 1: Taper external threads and parallel internal threads – Dimensions, tolerances and designation; German version EN 10226-1:2004
DIN EN 10284-2000 聚乙烯(PE)管道系统用带压缩端的可锻铸铁管件 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000
DIN EN 10289-2004 岸上和海上管道用钢管和配件.外部液体用环氧和改良环氧覆层 Steel tubes and fittings for onshore and offshore pipelines – External liquid applied epoxy and epoxy-modified coatings; German version EN 10289:2002
DIN EN 10290-2004 岸上和海上管道用钢管和配件.外部液体应用聚氨酯和改良聚氨酯覆层 Steel tubes and fittings for onshore and offshore pipelines – External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002
DIN EN 10301-2004 海上和近海管道用钢管和配件.降低无腐蚀气体运输摩擦的内涂层 Steel tubes and fittings for on and offshore pipelines – Internal coating for the reduction of friction for conveyance of non corrosive gas; German version EN 10301:2003
DIN EN 10310-2004 近海和海上管道用钢管和配件.内外部聚酰胺粉末基涂层 Steel tubes and fittings for onshore and offshore pipelines – Internal and external polyamide powder based coatings; German version EN 10310:2003
DIN EN 10329-2006 岸上和海上管道用钢管和配件.外部连接涂层;德文版本EN 10329-2006 Steel tubes and fittings for onshore and offshore pipelines – External field joint coatings; German version EN 10329:2006
DIN EN 1053-1995 塑料管道系统.非承压热塑管道系统.防水性试验方法 Plastics piping systems – Thermoplastics piping systems for non-pressure applications – Test method for watertightness; German version EN 1053:1995
DIN EN 1054-1995 塑料管道系统.建筑物排污热塑管道系统.连接件气密性试验方法 Plastics piping systems – Thermoplastics piping systems for soil and waste discharge – Test method for airtightness of joints; German version EN 1054:1995
DIN EN 1055-1996 塑料管道系统.建筑物排水排污热塑制管道系统.耐温度循环试验方法 Plastics piping systems – Thermoplastics piping systems for soil and waste discharge inside buildings – Test method for resistance to elevated temperature cycling; German version EN 1055:1996
DIN EN 1092-1-2002 法兰及其连接件.管道、阀门、配件和附件用圆形法兰.第1部分:用PN标注的钢制法兰; 德文版本 EN 1092-1:2001 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories – Part 1: Steel flanges, PN designated; German version EN 1092-1:2001
DIN EN 1092-3-2004 法兰及其连接件.PN标注的管道、阀门、配件和附件用圆形法兰.第3部分:铜合金法兰 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
DIN EN 1092-4-2002 法兰及其连接件.按PN标志的管道、阀门、配件和附件用圆形法兰.第4部分:铝合金法兰; 德文版本 EN 1092-4:200 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges; German version EN 1092-4:2002
DIN EN 1093-7-1998 机械的安全性.对漂浮在空气中的有害物质排放的评估.第7部分:管道出口中物质的分离效率 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 7: Separation efficiency by mass, ducted outlet; German version EN 1093-7:1998
DIN EN 1119-1996 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和配件.密封性和耐柔性连接和铰链连接磨损能力试验方法 Plastics piping systems – Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings – Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996
DIN EN 1120-1996 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和配件.弯曲状态下管道内壁抗化学腐蚀能力测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996
DIN EN 1123-2-1999 带插接套管废水管道.纵向焊缝热镀锌钢管道和管件.第2部分:尺寸 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems – Part 2: Dimensions; German version EN 1123-2:1999
DIN EN 1123-3-2005 废水系统用带插接套的长焊缝焊接热浸镀锌钢管制管道和管件.第3部分:真空排水系统和船上排水系统的尺寸和特 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems – Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
DIN EN 1124-2-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第2部分:S系统.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems – Part 2: Systeme S; dimensions; German version EN 1124-2:1999
DIN EN 1124-3-1999 带插接套管废水管道.纵向焊缝不锈钢制造管和管件.第3部分:X系统.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems – Part 3: System X; dimensions; German version EN 1124-3:1999
DIN EN 12007-1-2000 燃气供应系统.最大使用压力小于等于16bar的管道.第1部分:一般功能推荐规范 Gas supply systems – Pipelines for maximum operating pressure up to and including 16 bar – Part 1: General functional recommendations; German version EN 12007-1:2000
DIN EN 12007-2-2000 燃气供应系统.最大使用压力小于等于16bar的管道.第2部分:聚乙烯管专用功能推荐规范(最大使用压力小于等于10 Gas supply systems – Pipelines for maximum operating pressure up to and including 16 bar – Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar); German version EN 12007-2:2000
DIN EN 12007-3-2000 燃气供应系统.最大使用压力小于等于16bar的管道.第3部分:钢专用功能推荐规范 Gas supply systems – Pipelines for maximum operating pressure up to and including 16 bar – Part 3: Specific functional recommendations for steel; German version EN 12007-3:2000
DIN EN 12007-4-2000 燃气供应系统.最大使用压力小于等于16bar的管道.第4部分:修复管道的专用功能推荐规范 Gas supply systems – Pipelines for maximum operating pressure up to and including 16 bar – Part 4: Specific functional recommendations for renovation; German version EN 12007-4:2000
DIN EN 12056-2-2001 建筑物内重力排水系统.第2部分:卫生管道的布局和计算 Gravity drainage systems inside buildings – Part 2: Sanitary pipework, layout and calculation; German version EN 12056-2:2000
DIN EN 12061-1999 塑料管道系统.热塑管接头.耐冲击性能试验方法 Plastics piping systems – Thermoplastics fittings – Test method for impact resistance; German version EN 12061:1999
DIN EN 12068-1999 阴极防护.带阴极防护装置敷设在土壤和水中的钢管管道防腐用有机包封.带材和收缩材料 Cathodic protection – External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection – Tapes and shrinkable materials; German version EN 12068:1998
DIN EN 12095-1997 塑料管道系统.雨水管道系统卡圈.卡圈强度试验方法 Plastics piping systems – Brackets for rainwater piping systems – Test method for bracket strength; German version EN 12095:1997
DIN EN 12099-1997 塑料管道系统.聚乙烯管道材料和部件.挥发物含量测定 Plastics piping systems – Polyethylene piping materials and components – Determination of volatile content; German version EN 12099:1997
DIN EN 12100-1997 塑料管道系统.聚乙烯(PE)阀.三点负载抗弯曲试验方法 Plastics piping systems – Polyethylene (PE) valves – Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 12106-1997 塑料管道系统.聚乙烯管道.挤压后耐内压试验方法 Plastics piping systems – Polyethylene (PE) pipes – Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997
DIN EN 12107-1997 塑料管道系统.注塑热塑性塑料配件、阀门和附件.注塑热塑材料管件持久静液压强度的测定 Plastics piping systems – Injection-moulded thermoplastics fittings, valves and ancillary equipment – Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
DIN EN 12117-1997 塑料管道系统.配件、阀门和附件.气流和压降关系的测定 Plastics piping systems – Fittings, valves and ancillaries – Determination of gaseous flow rate/pressure drop relationships; German version EN 12117:1997
DIN EN 12118-1997 塑料管道系统.电量分析法测定热塑性塑料含水量 Plastics piping systems – Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
DIN EN 12119-1997 塑料管道系统.聚乙烯(PE)管.耐温度循环试验方法 Plastics piping systems – Polyethylene (PE) valves – Test method for resistance to thermal cycling; German version EN 12119:1997
DIN EN 12200-1-2001 地上露天用塑料雨水管道系统.未增塑聚氯乙烯.第1部分:管、管件和管道系统规范 Plastics rainwater piping systems for above ground external use – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000
DIN EN 12201-1-2003 供水用塑料管道系统.聚乙烯.第1部分:总则 Plastics piping systems for water supply – Polyethylene (PE) – Part 1: General; German version EN 12201-1:2003
DIN EN 12201-2-2003 供水用塑料管道系统.聚乙烯.第2部分:管道 Plastics piping systems for water supply – Polyethylene (PE) – Part 2: Pipes; German version EN 12201-2:2003
DIN EN 12201-3-2003 供水用塑料管道系统.聚乙烯.第3部分:管件 Plastics piping systems for water supply – Polyethylene (PE) – Part 3: Fittings; German version EN 12201-3:2003
DIN EN 12201-5-2003 供水用塑料管道系统.聚乙烯.第5部分:系统使用的适合性 Plastics piping systems for water supply – Polyethylene (PE) – Part 5: Fitness for purpose of the system; German version EN 12201-5:2003
DIN EN 12220-1998 建筑物内通风.空气管道.一般通风用圆形法兰尺寸 Ventilation for buildings – Ductwork – Dimensions of circular flanges for general ventilation; German version EN 12220:1998
DIN EN 12236-2002 建筑物通风.管道悬吊装置和支撑物.强度要求 Ventilation for buildings – Ductwork hangers and supports – Requirements for strength; German version EN 12236:2002
DIN EN 12237-2003 建筑物的通风.管道作业.圆形薄金属板管道的强度和泄漏 Ventilation for buildings – Ductwork – Strength and leakage of circular sheet metal ducts; German version EN 12237:2003
DIN EN 1225-1996 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.潮湿蠕变系数测定和长时期规定圆度稳定性计算 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness; German version EN 1225:1996
DIN EN 12256-1998 塑料管道系统.热塑管接件.已组装管接件的机械强度或柔性的测试方法 Plastics piping systems – Thermoplastics fittings – Test method for mechanical strength or flexibility of fabricated fittings; German version EN 12256:1998
DIN EN 1226-1996 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.耐初始圆度变形验证方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Test method to prove the resistance to initial ring deflection; German version EN 1226:1996
DIN EN 1227-1998 塑料管道系统.玻璃纤维增强热固塑料管(GFK).测定潮湿条件下环形件持久变形性 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the long-term ultimate relative ring deflection under wet conditions; German version EN 1227:1997
DIN EN 12279-2005 燃气供应系统.动力管道上的气压调节装置.功能要求 Gas supply systems – Gas pressure regulating installations on service lines – Functional requirements; German version EN 12279:2000 + A1:2005
DIN EN 1228-1996 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.初始规定圆度稳定性测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of initial specific ring stiffness; German version EN 1228:1996
DIN EN 1229-1996 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.管壁短期内压密封性验证试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996
DIN EN 12293-1999 塑料管道系统.冷、热水用热塑性塑料管道和管件.检验已安装的组件耐温度循环的试验方法 Plastics piping systems – Thermoplastics pipes and fittings for hot and cold water – Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999
DIN EN 12294-1999 塑料管道系统.热水和冷水系统.真空密封性的检验方法 Plastics piping systems – Systems for hot and cold water – Test method for leaktightness under vacuum; German version EN 12294:1999
DIN EN 12295-1999 塑料管道系统.热水和冷水用热塑性塑料管和相关管件.管接头耐循环压力的检测方法 Plastics piping systems – Thermoplastics pipes and associated fittings for hot and cold water – Test methods for resistance of joints to pressure cycling; German version EN 12295:1999
DIN EN 12308-1998 液体天然气设施和设备.液体天然气管道使用的法兰连接件的密封垫片的适用性试验 Installations and equipment for liquefied natural gas – Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998
DIN EN 12474-2001 海底管道的阴极防护 Cathodic protection for submarine pipelines; German version EN 12474:2001
DIN EN 12514-2-2000 油燃烧器供油系统的安装.第1部分:安全要求和试验.部件,阀门管道,过滤器,油气分离器,油量计 Installations for oil supply systems for oil burners – Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000
DIN EN 12585-1999 玻璃装置,管道和管连接件.DN 15至DN 1000的管道和管连接件.匹配性和可互换性 Glass plant, pipeline and fittings – Pipeline and fittings DN 15 to DN 1000 – Compatibility and interchangeability; German version EN 12585:1998
DIN EN 12629-5-1-2004 生产混凝土和硅酸盐建筑产品用机器.安全.第5-1部分:垂直轴的管道制造机械 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1: Pipe making machines manufacturing in the vertical axis; German version EN 12629-5-1:2003
DIN EN 12629-5-2-2004 生产混凝土和硅酸盐建筑产品用机器.安全.第5-2部分:水平轴的管道制造机械 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2: Pipe making machines manufacturing in the horizontal axis; German version EN 12629-5-2:2003
DIN EN 12629-5-3-2004 生产混凝土和硅酸盐建筑产品用机器.安全.第5-3部分:管道预加应力机械 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-3: Pipe prestressing machines; German version EN 12629-5-3:2003
DIN EN 12629-5-4-2004 生产混凝土和硅酸盐建筑产品用机器.安全.第5-4部分:混凝土管道涂层机械 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003
DIN EN 12666-1-2006 无压地下排水和排污塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统规范.德文版本EN 12666-1-2005 Plastics piping systems for non-pressure underground drainage and sewerage – Polyethylene (PE) – Part 1: Specifications for pipes, fittings and the system; German version EN 12666-1:2005
DIN EN 12735-1-2005 铜和铜合金.空气调节和制冷用无缝圆形铜管.第1部分:管道系统用管 Copper and copper alloys – Seamless, round copper tubes for air conditioning and refrigeration – Part 1: Tubes for piping systems; German version EN 12735-1:2001 + A1:2005
DIN EN 12763-2000 建筑物排水系统纤维水泥管道和配件.尺寸和交货技术条件 Fibre-cement pipes and fittings for discharge systems for buildings – Dimensions and technical terms of delivery; German version EN 12763:2000
DIN EN 1277-2004 塑料管道系统.用于地下无压装置的热塑性管道系统.橡胶密封环连接件密封性的检验方法 Plastics piping systems – Thermoplastics piping systems for buried non-pressure applications – Test methods for leaktightness of elastomeric sealing ring type joints; German version EN 1277:2003
DIN EN 12842-2000 PVC-U或PE管道系统用球墨铸铁管件.要求和试验方法 Ductile iron fittings for PVC-U or PE piping systems – Requirements and test methods; German version EN 12842:2000
DIN EN 1293-1999 气动压力排水管道构件一般要求 General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers; German version EN 1293:1999
DIN EN 1295-1-1997 各种负荷条件下地下管道结构设计.第1部分:一般要求 Structural design of buried pipelines under various conditions of loading – Part 1: General requirements; German version EN 1295-1:1997
DIN EN 13052-1-2001 有机物对饮用水的影响.有机物质.管道系统中水的颜色和浊度测定.第1部分:试验方法 Influence of organic materials on water intended for human consumption – Organic materials; Determination of colour and turbidity of water in piping systems – Part 1: Test method; German version EN 13052-1:2001
DIN EN 13090-2001 建筑物燃气管道螺纹接头再密封方法 Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000
DIN EN 13136-2005 制冷系统和热泵.释压装置和相关管道.计算方法 Refrigerating systems and heat pumps – Pressure relief devices and their associated piping – Methods for calculation; German version EN 13136:2001 + A1:2005
DIN EN 13220-1999 与医用气体管道系统的终端装置相连接的流量测量设备 Flow-metering devices for connection to terminal units of medical gas pipeline systems; German version EN 13220:1998
DIN EN 13244-1-2003 地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第1部分:总则 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Part 1: General; German version EN 13244-1:2002
DIN EN 13244-2-2003 地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第2部分:管道 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Part 2: Pipes; German version EN 13244-2:2002
DIN EN 13244-3-2003 地下和地上通用压力排水排污系统的塑料管道系统.聚乙烯(PE).第3部分:配件 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Part 3: Fittings; German version EN 13244-3:2002
DIN EN 13244-4-2003 地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第4部分:阀门 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Part 4: Valves; German version EN 13244-4:2002
DIN EN 13244-5-2003 地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第5部分:系统适用性 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Part 5: Fitness for purpose of the system; German version EN 13244-5:2002
DIN EN 1329-1-1999 建筑物污物和污水排放(低温和高温)用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系统规范; Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specifications for pipes, fittings and the system; German version EN 1329-1:1999
DIN EN 13403-2003 建筑物通风.非金属管.绝缘板制管道 Ventilation for buildings – Non-metallic ducts – Ductwork made from insulation ductboards; German version EN 13403:2003
DIN EN 13480 Bb.1-2002 金属工业用管道.第7部分;一致性评估程序使用指南; 德文版本 CEN/TR 13480-7:2002 Metallic industrial piping – Part 7: Guidance on the use of conformity assessment procedures; German version CEN/TR 13480-7:2002
DIN EN 13480-1 Berichtigung 1-2005 金属工业管道.第1部分:总则.德文版本 EN 13480-1-2002,对DIN EN 13480-1-2002的勘误 Metallic industrial piping – Part 1: General; German version EN 13480-1:2002, Corrigenda to DIN EN 13480-1:2002-08
DIN EN 13480-1-2002 金属工业用管道.第1部分;总则; 德文版本 EN 13480-1:2002 Metallic industrial piping – Part 1: General; German version EN 13480-1:2002
DIN EN 13480-1/A1-2005 金属工业用管道.第1部分.总则 Metallic industrial piping – Part 1: General; German version EN 13480-1:2002/A1:2005
DIN EN 13480-2 Berichtigung 1-2006 金属工业用管道.第2部分:材料 Metallic industrial piping – Part 2 : Materials; German version EN 13480-2:2002, Corrigenda 1 to DIN EN 13480-2:2002-08
DIN EN 13480-2-2002 金属工业用管道.第2部分;材料; 德文版本 EN 13480-2:2002 Metallic industrial piping – Part 2 : Materials; German version EN 13480-2:2002
DIN EN 13480-3 Berichtigung 1-2005 金属工业用管道.第3部分:设计和计算;德文版本 EN 13480-3-2002.对DIN EN 13480-3-2002 的勘误 Metallic industrial piping – Part 3: Design and calculation; German version EN 13480-3:2002, Corrigenda to DIN EN 13480-3:2002-08
DIN EN 13480-3 Berichtigung 2-2006 金属工业用管道.第3部分:计算和设计 Metallic industrial piping – Part 3: Design and calculation; German version EN 13480-3:2002, Corrigenda 2 to DIN EN 13480-3:2002-08
DIN EN 13480-3-2002 金属工业用管道.第3部分;计算和设计; 德文版本 EN 13480-3:2002 Metallic industrial piping – Part 3: Design and calculation; German version EN 13480-3:2002
DIN EN 13480-3/A1-2005 金属工业用管道.第3部分:设计和计算 Metallic industrial piping – Part 3: Design and calculation; German version EN 13480-3:2002/A1:2005
DIN EN 13480-4 Berichtigung 1-2006 金属工业用管道.第4部分:生产和设备 Metallic industrial piping – Part 4: Fabrication and installation; German version EN 13480-4:2002, Corrigenda 1 to DIN EN 13480-4:2002-08
DIN EN 13480-4-2002 金属工业用管道.第4部分;生产和安装; 德文版本 EN 13480-4:2002 Metallic industrial piping – Part 4: Fabrication and installation; German version EN 13480-4:2002
DIN EN 13480-5 Berichtigung 1-2006 金属工业用管道.第5部分:检验和测试 Metallic industrial piping – Part 5: Inspection and testing; German version EN 13480-5:2002, Corrigenda 1 to DIN EN 13480-5:2002-08
DIN EN 13480-5-2002 金属工业用管道.第5部分;检验和测试; 德文版本 EN 13480-5:2002 Metallic industrial piping – Part 5: Inspection and testing; German version EN 13480-5:2002
DIN EN 13480-6-2004 金属工业管道.第6部分:埋管的额外要求 Metallic industrial piping – Part 6: Additional requirements for buried piping; German version EN 13480-6:2004
DIN EN 13480-6/A1-2006 金属工业管道.第6部分:埋管的额外要求.德文版本EN 13480-6-2004/A1-2005 Metallic industrial piping – Part 6: Additional requirements for buried piping; German version EN 13480-6:2004/A1:2005
DIN EN 13566-1-2003 地下非承压排水排污网翻新用塑料管道系统.第1部分:总则 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Part 1: General; German version EN 13566-1:2002
DIN EN 13566-2-2006 地下非压力排水排污网翻新用塑料管道系统.第2部分:连续管加衬.德文版本 EN 13566-2-2005 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Part 2: Lining with continuous pipes; German version EN 13566-2:2005
DIN EN 13566-3-2003 地下非承压排水排污网翻新用塑料管道系统.第3部分:紧配合管加衬 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Part 3: Lining with close-fit pipes; German version EN 13566-3:2002
DIN EN 13566-4-2003 地下非压力排水排污网翻新用塑料管道系统.第4部分:硫化管加衬 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Part 4: Lining with cured-in-place pipes; German version EN 13566-4:2002
DIN EN 13598-1-2003 无压力地下排水和排污用塑料管道系统.非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE).第1部分:包括浅层检 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) – Part 1: Specifications for ancillary fittings including shallow inspection chambers; German version EN 13598-1:2003
DIN EN 13636-2004 地下金属罐和相关管道的阴极保护 Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004
DIN EN 1366-1-1999 服务设施防火试验.第1部分:管道 Fire resistance tests on service installations – Part 1: Ducts; German version EN 1366-1:1999
DIN EN 1366-8-2004 服务设施的防火检验.第8部分:排烟管道 Fire resistance tests for service installations – Part 8: Smoke extraction ducts; German version EN 1366-8:2004
DIN EN 13689-2003 翻新塑料管道系统分类和设计指南 Guidance on the classification and design of plastics piping systems used for renovation; German version EN 13689:2002
DIN EN 1393-1996 塑料管道系统.玻璃纤维增强热固性塑料管(GFK).初始纵向拉伸性能测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996
DIN EN 1394-1996 塑料管道系统.玻璃纤维增强热固塑料管(GFK).切线方向表面管头拉伸性能测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996
DIN EN 13942-2005 石油和天然气工业.管道输送系统.管道阀 Petroleum and natural gas industries – Pipeline transportation systems – Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003
DIN EN 1401-1-1998 非压力地下排水和污水用塑料管道系统.硬聚氯乙烯(PVC-V).第1部分:管、管件和系统规范 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998
DIN EN 1411-1996 塑料管和管道系统.热塑塑料管.梯级法测定抗外冲击应力能力 Plastics piping and ducting systems – Thermoplastics pipes – Determination of resistance to external blows by the staircase method; German version EN 1411:1996
DIN EN 14114-2002 建筑设备和工业设施的湿热性能.水蒸汽扩散计算.制冷管道绝缘系统; 德文版本 EN 14114:2002 Hygrothermal performance of building equipment and industrial installations – Calculation of water vapour diffusion – Cold pipe insulation systems; German version EN 14114:2002
DIN EN 14125-2005 加油站的地下装置用热塑性和柔性金属管道 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations; German version EN 14125:2004
DIN EN 14141-2004 天然气输送管道用阀门.性能要求和试验 Valves for natural gas transportation in pipelines – Performance requirements and tests; German version EN 14141:2003
DIN EN 14161-2004 石油和天然气工业.管道传输系统 Petroleum and natural gas industries – Pipeline transportation systems (ISO 13623:2000 modified); German and English version EN 14161:2003
DIN EN 14163-2002 石油工业和天然气工业.管道输送系统.管路焊接 (ISO 13847:2000, 修订版); 德文版本 EN 14163:2001、德文和 Petroleum and natural gas industries – Pipeline transportation systems – Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English
DIN EN 1420-1-1999 有机物对饮用水的影响.管道系统中水气味和味道测定 Influence of organic materials on water intended for human consumption – Determination of odour and flavour assessment of water in piping systems – Part 1: Test method; German version EN 1420-1:1999
DIN EN 14239-2004 建筑物通风.管道系统.管道系统表面积的测量 Ventilation for buildings – Ductwork – Measurement of ductwork surface area; German Version EN 14239:2004
DIN EN 14364-2006 压力和无压力排水和排污塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统.管件、配件和连接 Plastics piping systems for drainage and sewerage with or without pressure – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) – Specifications for pipes, fittings and joints; German version EN 14364:2006
DIN EN 1437-2002 塑料管道系统.地下排水排污用管道系统.抗混合温度循环和外加负荷的试验方法; 德文版本 EN 1437:2002 Plastics piping systems – Piping systems for underground drainage and sewerage – Test method for resistance to combined temperature cycling and external loading; German version EN 1437:2002
DIN EN 14408-1-2004 地下气体供给网络的翻修用塑料管道系统.第1部分:总则 Plastics piping systems for renovation of underground gas supply networks – Part 1: General; German version EN 14408-1:2004
DIN EN 14408-3-2004 地下气体供给网络的翻修用塑料管道设备.第3部分:紧配合管道衬 Plastics piping systems for renovation of underground gas supply networks – Part 3: Lining with close-fit pipes; German version EN 14408-3:2004
DIN EN 14409-1-2004 地下水供给网络的翻新用塑料管道设备.第1部分:总则 Plastics piping systems for renovation of underground water supply networks – Part 1: General; German version EN 14409-1:2004
DIN EN 14409-3-2004 地下水供给网络的翻新用塑料管道设备.第3部分:紧配合管道衬 Plastics piping systems for renovation of underground water supply networks – Part 3: Lining with close-fit pipes; German version EN 14409-3:2004
DIN EN 14419-2004 区域供暖管.直埋式热水供应网用预绝缘粘合管道系统.监视系统 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Surveillance systems; German version EN 14419:2003
DIN EN 1446-1996 塑料管及管道系统.热塑管.环形挠性测定 Plastics piping and ducting systems – Thermoplastics pipes – Determination of ring flexibility; German version EN 1446:1996
DIN EN 1447-1996 塑料管道系统.玻璃纤维增强热固塑料管(GFK).内压耐久性能测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of longterm resistance to internal pressure; German version EN 1447:1996
DIN EN 1448-1997 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.抗拉套管和顶尖与弹性体密封件连接的结构类型检验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) components – Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996
DIN EN 1449-1997 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.已粘接套管和顶尖连接件结构类型检验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) components – Test methods to prove the design of a cemented socket- and -spigot joints; German version EN 1449:1996
DIN EN 1450-1999 塑料管道系统.玻璃纤维增强的热固塑料部件(GFK).对采用螺栓固定的法兰连接点的设计进行验证的试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) components – Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998
DIN EN 1451-1-1999 建筑物结构体中的废水和污物排放系统用塑料管道系统(低温和高温).聚丙烯(PP).第1部分:管、管接头和管道系统 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene (PP) – Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998
DIN EN 1452-1-1999 供水用塑料管道系统.无增塑聚氯乙烯(PVC-U).第1部分:概述 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: General; German version EN 1452-1:1999
DIN EN 1452-2-1999 供水用塑料管道系统.无增塑聚氯乙烯(PVC-U).第2部分:管 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Pipes; German version EN 1452-2:1999
DIN EN 1452-3-1999 供水用塑料管道系统.无增塑聚氯乙烯(PVC-U).第3部分:管件 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 3: Fittings; German version EN 1452-3:1999
DIN EN 1452-4-1999 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:阀门和辅助设备 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 4: Valves and ancillary equipment; German version EN 1452-4:1999
DIN EN 1452-5-1999 供水用塑料管道系统.无增塑聚氯乙烯(PVC-U).第5部分:系统使用的适用性 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 5: Fitness for purpose of the system; German version EN 1452-5:1999
DIN EN 14525-2005 不同材料(球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥)管道用球墨铸铁大公差联接器和法兰接头 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004
DIN EN 1453-1-2000 建筑物内污物和废物排出(高温和低温)用承重墙管的塑料管道系统. 硬氯乙烯管(PVC-U).第1部分:管道和系统规范 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specifications for pipes and the system; German version EN 1453-1:2000
DIN EN 1455-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道、管件和系 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Acrylonitrile-butadiene-styrene (ABS) – Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999
DIN EN 1456-1-2001 地下和地上排水和排污塑料压力管道系统.未增塑聚氯乙烯(PVC-U).第1部分:管道元件和系统规范 Plastics piping systems for buried and above ground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specifications for piping components and the system; German version EN 1456-1:2000
DIN EN 14741-2006 热塑管和管道系统.地下非压力设施用接头.通过评估密封压力测定弹性密封件接头的长期密封性能的试验方法 Thermoplastics piping and ducting systems – Joints for buried non-pressure applications – Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure; German version EN 14741:2006
DIN EN 14758-1-2006 无压地下排水和污水塑料管道系统.有矿物调节剂的聚丙烯(PP-MD)管道系统.第1部分:管、管件和系统规范.德文版 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifiers (PP-MD) – Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005
DIN EN 14790-2006 固定源排放.管道中水蒸气含量测定 Stationary source emissions – Determination of the water vapour in ducts; German version EN 14790:2005
DIN EN 14802-2006 塑料管道系统.监测室和人孔用热塑性竖井.测定耐路表面和交通载荷能力.德文版本EN 14802-2005 Plastics piping systems – Thermoplastics shafts or risers for inspection chambers and manholes – Determination of resistance against surface and traffic loading; German version EN 14802:2005
DIN EN 14870-1-2005 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第1部分:进气弯头 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004
DIN EN 14870-2-2005 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004
DIN EN 14870-3-2006 石油和天然气工业.管道输送系统用进气弯管、配件和法兰.第3部分:法兰 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 3: Flanges (ISO 15590-3:2004 modified); English version EN 14870-3:2006
DIN EN 1505-1998 建筑物通风.矩形截面薄板制通风管道和异型件.尺寸 Ventilation for buildings – Sheet metal air ducts and fittings with rectangular cross-section – Dimensions; German version EN 1505:1997
DIN EN 1506-1998 建筑物通风.圆形截面薄板制通风管道和异型件.尺寸 Ventilation for buildings – Sheet metal air ducts and fittings with circular cross-section – Dimensions; German version EN 1506:1997
DIN EN 1519-1-2000 建筑结构中排污(低温和高温)用塑料管道系统.聚乙烯(PE).第1部分:管、管件和系统的规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polyethylene (PE) – Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999
DIN EN 1555-1-2003 气体燃料塑料管道供气系统.聚乙烯(PE).第1部分:总则 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 1: General; German version EN 1555-1:2002
DIN EN 1555-2-2003 气体燃料塑料管道供气系统.聚乙烯(PE).第2部分:管道 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 2: Pipes; German version EN 1555-2:2002
DIN EN 1555-3-2005 气体燃料供应用塑料管道系统.聚乙烯(PE).第3部分:配件 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 3: Fittings; German version EN 1555-3:2002 + A1:2005
DIN EN 1555-4-2003 气体燃料塑料管道供气系统.聚乙烯(PE).第4部分:阀门 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 4: Valves; German version EN 1555-4:2002
DIN EN 1555-5-2003 气体燃料塑料管道供气系统.聚乙烯(PE).第5部分:系统的适用性 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 5: Fitness for purpose of the system; German version EN 1555-5:2002
DIN EN 1565-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.苯乙烯共聚掺混料(SAN+PVC).第1部分:管道、管件和系 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Styrene copolymer blends (SAN+PVC) – Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998
DIN EN 1566-1-1999 建筑结构中污物和废水排放(低温和高温)用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:管道、管件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Chlorinated poly(vinyl chloride) (PVC-C) – Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998
DIN EN 1594-2000 供气系统.最大工作压力大于16巴的管道.功能要求 Gas supply systems – Pipelines for maximum operating pressure over 16 bar – Functional requirements; German version EN 1594:2000
DIN EN 1610 Bb.1-1997 排水和污水管道的铺设和检验.相关标准和规范的目录 Construction and testing of drains and sewers – List of relevant standards and guidelines (status as of 1997-02)
DIN EN 1610-1997 下水管道的铺设和检验 Construction and testing of drains and sewers; German version EN 1610:1997
DIN EN 1638-1997 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管.圆筒内压循环作用试验方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Test method for the effects of cyclic internal pressure; German version EN 1638:1997
DIN EN 1680-1997 塑料管道系统.聚乙烯(PE)管道系统用阀门.操作机构弯曲时和弯曲后密封性试验方法 Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 1704-1997 塑料管道系统.热塑管道系统用阀门.弯曲加温度循环后阀门完好性测试方法 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
DIN EN 1705-1997 塑料管道系统.热塑阀门.外部冲击后阀门完好性试验方法 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN EN 1716-1997 塑料管道系统.聚乙烯(PE)开孔三通.安装就位的开孔三通抗冲击应力试验方法 Plastics piping systems – Polyethylene (PE) tapping tees – Test method for impact resistance of an asssembled tapping tee; German version EN 1716:1997
DIN EN 1775-2001 供气.建筑物煤气管道工程.最大允许工作压力≤5巴.功能推荐标准 Gas supply – Gas pipework for buildings – Maximum operating pressure 5 bar; Functional recommendations (includes Amendment A1:2000 and Amendment A2:2000); German version EN 1775:1998 + A1:2000 + A2:2000
DIN EN 1796-2006 有或无压力水供应塑料管道系统.基于不饱和聚酯(UP)的玻璃增强热硬塑料(GRP) Plastics piping systems for water supply with or without pressure – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2006
DIN EN 1852-1-2003 无压地下排水和污水塑料管道系统.聚丙烯(PP).第1部分:管、配件和系统规范 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Part 1: Specifications for pipes, fittings and the system (includes amendment A1:2002); German version EN 1852-1:1997 + A1:2002
DIN EN 1861-1998 制冷设备和热泵.系统流程图和管道流程及仪器流程图.结构布局和符号 Refrigerating systems and heat pumps – System flow diagrams and piping and instrument diagrams – Layout and symbols; German version EN 1861:1998
DIN EN 1862-1997 塑料管道系统.玻璃纤维增强热固性塑料管(GFK).在化学环境下存放后相对蠕变系数的测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the relative flexural creep factor following exposure to a chemical environment; German version EN 1862:1997
DIN EN 187105-2002 单膜式光纤电缆(管道/直埋安装); 德文版本 EN 187105:2002 Single mode optical cable (duct/direct buried installation); German version EN 187105:2002
DIN EN 1905-1999 塑料管道系统.未增塑的聚氯乙烯(PVC-V)管材、管连接件和材料.根据氯总含量评定聚氯乙烯含量的方法 Plastics piping systems – Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material – Method for assessment of the PVC content based on total chlorine content; German version EN 1905:1998
DIN EN 1971-1998 铜和铜合金.管道的涡流检验 Copper and copper alloys – Eddy current test for tubes; German version EN 1971:1998
DIN EN 1979-1999 塑料管道和导管系统.热塑性螺旋成形的结构壁管材.接缝抗拉强度的测定 Plastics piping and ducting systems – Thermoplastics spirally-formed structured-wall pipes – Determination of the tensile strength of a seam; German version EN 1979:1999
DIN EN 2258-1997 航空和航天.铝和铝合金制圆形管道.直径3.2mm=<100mm,壁厚0.6mm=<2.5mm.尺寸 Aerospace series – Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm D 100 mm, thickness 0,6 mm a 2,5 mm; dimensions; German version EN 2258:1997
DIN EN 24006-1993 封闭管道液流量测量.术语符号 Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993
DIN EN 253-2006 区域供暖管道.直埋式供热网络用预隔热粘结管系统.钢制接用户管系的管组件.聚氨脂保温层和聚乙烯外护套。德 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2003 + A1:2005
DIN EN 2656-2002 航空航天系列.管道连接件.焊接连接端头.几何图形; 德文版本 EN 2656:2001 Aerospace series – Pipe coupling – Coupling end, welded; Geometric configuration; German version EN 2656:2001
DIN EN 288-9-1999 金属材料焊接程序的规范和批准.第9部分:陆地和近海输送管道现场对接的管道焊接程序的试验 Specification and approval of welding procedures for metallic materials – Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines; German version EN 288-9:1999
DIN EN 295-10-2005 排水和污水管道用陶土管、配件及管连接件.第10部分:性能要求 Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 10: Performance requirements; German version EN 295-10:2005
DIN EN 448-2003 区域供暖管道.直埋式热水供应网预隔热连接管道系统.聚氨酯绝热和聚乙烯外覆层钢管成套配件 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2003
DIN EN 4550-1-2004 航空航天系列.管道连接件37设计构造.英尺系列.第1部分:球形阳螺纹焊接端 Aerospace series – Pipe coupling 37° – Design configuration – Inch series – Part 1: Male sealing ends, spherical; German and English version EN 4550-1:2003
DIN EN 4550-2-2004 航空航天系列.管道连接件37设计构造.英制.第2部分:端口 Aerospace series – Pipe coupling 37° – Design confirguration – Inch series – Part 2: Port ends; German and English version EN 4550-2:2003
DIN EN 4550-3-2004 航空航天系列.管道连接件37设计构造.英制.第3部分:端口接头 Aerospace series – Pipe coupling 37° – Design configuration – Inch series – Part 3: Port connections; German and English version EN 4550-3:2003
DIN EN 4550-4-2004 航空航天系列.管道连接件37设计构造.英制.第4部分:承口密封端 Aerospace series – Pipe coupling 37° – Design configuration – Inch series – Part 4: Female sealing ends; German and English version EN 4550-4:2003
DIN EN 4551-2004 航空航天系列.耐热钢制管道连接件37转的螺套.英制系列 Aerospace series – Pipe couplings, 37°, in heat resisting steel – Swivel nuts – Inch series; German and English version EN 4551:2003
DIN EN 45510-7-1-2000 发电厂设备和系统购置指南.第7-1部分:管道系统和阀.高压管道系统 Guide for procurement of power station plant, equipment and systems – Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999
DIN EN 45510-7-2-2000 发电厂设备和系统购置指南.第7-2部分:管道系统和阀.锅炉和高压管路阀门 Guide for procurement of power station plant, equipment and systems – Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999
DIN EN 476-1997 自流雨水和污水管道构件通用要求 General requirements for components used in discharge pipes, drains and sewers for gravity systems; German version EN 476:1997
DIN EN 488-2003 区域供暖管道.直埋式热水供应网预隔热连接管道系统.聚氨酯绝热和聚乙烯外覆层钢管钢阀门组件 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003
DIN EN 489-2003 区域供暖管道.直埋式热水供应网预隔热连接管道系统.聚氨酯绝热和聚乙烯外覆层钢管接头组件 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 489:2003
DIN EN 50085-1-2006 电气设备用电缆中继系统和电缆管道系统.第1部分:一般要求 Cable trunking systems and cable ducting systems for electrical installations – Part 1: General requirements; German version EN 50085-1:2005
DIN EN 50085-2-3-1999 电气设备用电缆中继系统和电缆管道系统.配电室设备用有槽电缆管道系统特殊要求 Cable trunking systems and cable ducting systems for electrical installations – Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets; German version EN 50085-2-3:1999
DIN EN 50249-2003 地下管道和电缆电磁波监测器.性能和安全性 Electromagnetic locators for buried pipes and cables – Performance and safety; German version EN 50249:2002
DIN EN 50406-2-2005 高比特率电信网络用终端用户多组电缆.第2部分:管道电缆和地下电缆 End user multi-pair cables used in high bit rate telecommunication networks – Part 2: Duct and buried cables; German version EN 50406-2:2004
DIN EN 512/A1-2002 纤维水泥制品.压力管道和接头.修改件A1:2001; 德文版本 EN 512:1994/A1:2001 Fibre-cement products – Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001
DIN EN 545-2002 水管路用延性铸铁管道、配件、附件及其接头.要求和试验方法; 德文版本 EN 545:2002 Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods; German version EN 545:2002
DIN EN 558-1-1995 工业阀门.带法兰管道中的金属阀门面-面尺寸和面-中心尺寸.第1部分:按PN标识的阀门 Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems – Part 1: PN-designated valves; German version EN 558-1:1995
DIN EN 558-2-1995 工业阀门.带法兰管道中的金属阀门面-面尺寸和面-中心尺寸.第2部分:按级别标识的阀门 Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems – Part 2: Class-designated valves; German version EN 558-2:1995
DIN EN 579-1993 塑料管道系统.网状交联聚乙烯管.溶剂提取法测定聚合度 Plastics piping systems; crosslinked polyethylene (PE-X) pipes; determination of degree of crosslinking by solvent extraction; German version EN 579:1993
DIN EN 580-2003 塑料管道系统.未增塑聚氯乙烯管.规定温度下抗二氯四甲烷的检验方法 Plastics piping systems – Unplasticized poly(vinyl chloride) (PVC-U) pipes – Test method for the resistance to dichloromethane at a specified temperature (DCMT); German version EN 580:2003
DIN EN 60794-3-10-2003 光缆.第3-10部分:户外电缆.管道光缆和直埋通信光缆的系列规范 (IEC 60794-3-10:2002、修订版); 德文版本 EN Optical fibre cables – Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified); German version EN 60794-3-10:2002
DIN EN 637-1994 塑料管道系统.玻璃纤维增强塑料部件.用重力测量法对成分含量的测定; 德文版本 EN 637:1994 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994
DIN EN 705-1994 塑料管道系统.玻璃纤维增强热固塑料管和管件.回归分析和应用方法 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analyses and their use; German version EN 705:1994
DIN EN 712-1994 热塑塑料管道系统.压力管和管接头之间承载端部的机械连接.恒定纵向作用力下抗拉出力的试验方法 Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993
DIN EN 713-1994 塑料管道系统.管接头和聚烯烃压力管间的机械连接.在内压和弯曲下密封性的试验方法 Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993
DIN EN 714-1994 热塑管道系统.压力管道和模压管件之间无末端承载的橡胶密封圈连接件.无端部拉力的流体静力内压力下的密封性 Thermoplastics piping systems – Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings – Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994
DIN EN 715-1994 热塑塑料管道系统.小直径压力管和管接头之间承载端部的连接.在水内压力下(包括端头推力)密封试验方法 Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994
DIN EN 727-1995 塑料管道和管道输送系统.热塑塑料管和管件.维卡软化温度(VST)的测定; 德文版本 EN 727:1994 Plastics piping and ducting systems – Thermoplastics pipes and fittings – Determination of Vicat softening temperature (VST); German version EN 727:1994
DIN EN 728-1997 塑料管和管道系统.聚烯烃管和接头.氧化感应时间测定 Plastics piping and ducting systems – Polyolefin pipes and fittings – Determination of oxidation induction time; German version EN 728:1997
DIN EN 737-1-1998 医疗气体管道系统.第1部分:医疗压缩气体和真空的管端装置 Medical gas pipeline systems – Part 1: Terminal units for compressed medical gases and vacuum; German version EN 737-1:1998
DIN EN 737-2-2000 医疗气体管道系统.第2部分:麻醉气清除系统.基本要求(包括修改件A1) Medical gas pipeline systems – Part 2: Anaesthetic gas scavenging disposal systems; basic requirements (includes Amendment A1:1999); German version EN 737-2:1998 + A1:1999
DIN EN 737-4-1998 医疗气体管道系统.第4部分:麻醉气体净化系统用管端装置 Medical gas pipeline systems – Part 4: Terminal units for anaesthetic gas scavenging systems; German version EN 737-4:1998
DIN EN 744-1995 塑料管道和管道输送系统.热塑塑料管.用昼夜连续法的抗内爆的试验方法; 德文版本 EN 744:1995 Plastics piping and ducting systems – Thermoplastics pipes – Test method for resistance to external blows by the round-the-clock-method; German version EN 744:1995
DIN EN 761-1994 塑料管道系统.玻璃增强热固性管.干燥条件蠕变系数测定 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under dry conditions; German version EN 761:1994
DIN EN 773-1999 液压排水管道构件一般要求 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers; German version EN 733:1999
DIN EN 802-1994 塑料管道和管道输送系统.压力管道系统用喷铸热塑管件.压碎造成最大变形的试验方法; 德文版本 EN 802:1994 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings for pressure piping systems – Test method for maximum deformation by crushing; German version EN 802:1994
DIN EN 803-1994 塑料管道系统.压力管道用橡胶密封圈连接件的热塑喷铸管件.无端部拉力的抗瞬时内压的试验方法; 德文版本 EN Plastics piping systems – Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping – Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994
DIN EN 804-1994 塑料管道系统.压力管道用带胶粘套管连接件的热塑喷铸管件.抗流体静力瞬时内压能力的试验方法; 德文版本 EN Plastics piping systems – Injection-moulded socket fittings for solvent-cemented joints for pressure piping – Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994
DIN EN 877-2000 建筑物排水用铸铁管道、管件及其接头和附件.要求、试验方法和质量保证 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance; German version EN 877:1999
DIN EN 911-1995 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头的连接.外部静力液压条件下的防漏试验方法; Plastics piping systems – Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping – Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995
DIN EN 917-1997 塑料管道系统.热塑阀门.耐内压和密封性试验方法 Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN EN 922-1995 塑料管道和管道输送系统.未增塑聚氯乙烯管和管件.测定粘度数值和K值计算用试样制备; 德文版本 EN 922:1994 Plastics piping and ducting systems – Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) – Specimen preparation for determination of the viscosity number and calculation of the K-value; German version EN 922:1994
DIN EN 969-1995 燃气管道用球墨铸铁管、管件、附件及其接头.要求和试验方法 Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods; German version EN 969:1995
DIN EN ISO 10380-2003 管道系统.波纹状金属软管和软管组件 Pipework – Corrugated metal hose and hose assemblies (ISO 10380:2003); German version EN ISO 10380:2003
DIN EN ISO 10806-2004 管道工程.波纹状金属软管用配件 Pipework – Fittings for corrugated metal hoses (ISO 10806:2003); German version EN ISO 10806:2003
DIN EN ISO 10807-1997 管道工程.爆燃性空气电缆保护用波纹金属软管组件 Pipework – Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996
DIN EN ISO 10931-2006 工业用塑料管道系统.聚偏氟乙烯(PVDF).元件和系统的规范.德文版本EN ISO 10931:2005 Plastics piping systems for industrial applications – Poly(vinylidene fluoride) (PVDF) – Specifications for components and the system (ISO 10931:2005); German version EN ISO 10931:2005
DIN EN ISO 11691-1996 声学.无气流管道消声器插入损失测量.实验室测量法 Acoustics – Determination of insertion loss of ducted silencers without flow – Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:1995
DIN EN ISO 12162-1996 压力管道用热塑性材料.分类.材料牌号和计算 Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure – Material designation and calculations (ISO 12162:1995); German version EN ISO 12162:1995
DIN EN ISO 13680-2002 石油工业和天然气工业.用作套管、铺设管道和连接器材的耐腐蚀合金无缝管.技术交货条件 (ISO 13680:2000); Petroleum and natural gas industries – Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock – Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001
DIN EN ISO 13703-2003 石油天然气工业.海上作业平台管道系统的设计和安装 Petroleum and natural gas industries – Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002
DIN EN ISO 13844-2000 塑料管道系统.用于硬聚氯乙烯(PVC-U)管道的弹性密封圈式承口连接件.负压下密封试验方法 Plastics piping systems – Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes – Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000
DIN EN ISO 13845-2000 塑料管道系统.用于硬聚氯乙烯(PVC-U)管道的弹性密封圈式承口连接件.内压下角度偏转密封试验方法 Plastics pipes systems – Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes – Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO 13845:2000
DIN EN ISO 13846-2001 塑料管道系统.热塑承压管用端部荷载轴承和无端部荷载轴承组件和连接件.测定水内压长期密封性的试验方法 Plastic piping systems – End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping – Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000
DIN EN ISO 14723-2003 石油和天然气工业.管道输送系统.海底管道阀 Petroleum and natural gas industries – Pipeline transportation systems – Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001
DIN EN ISO 14726-1-2001 船舶和造船技术.管道系统色标.第1部分:主色和介质 Ships and marine technology – Identification colours for the content of piping systems – Part 1: Main colours and media (ISO 14726-1:1999); German version EN ISO 14726-1:2001
DIN EN ISO 15465-2004 管道工程.带绕金属软管和软管配件 Pipework – Stripwound metal hoses and hose assemblies (ISO 15465:2004); German version EN ISO 15465:2004
DIN EN ISO 15493-2003 工业用塑料管道系统.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).元件 Plastics piping systems for industrial applications – Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) – Specifications for components and the system; Metric series (ISO 15493:2003); German version EN ISO 15493:2003
DIN EN ISO 15494-2003 工业用塑料管道系统.聚丁烯(PE)、聚乙烯(PE)和聚丙烯(PP).元件和系统的规范.米制系列 Plastics piping systems for industrial applications – Polybutylene (PB), polyethylene (PE) and polypropylene (PP) – Specifications for components and the system; Metric series (ISO 15494:2003); German version EN ISO 15494:2003
DIN EN ISO 15749-2-2004 船舶和海上技术.船舶和海上建筑物的排水系统.第2部分:重力系统用卫生排水和排水管道 Ships and marine technology – Drainage systems on ships and marine structures – Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004); German version EN ISO 15749-2:2004
DIN EN ISO 15749-3-2004 船舶和海上技术.船舶和海上建筑物排水系统.第3部分:真空系统用卫生排水和排水管道 Ships and marine technology – Drainage systems on ships and marine structures – Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004); German version EN ISO 15749-3:2004
DIN EN ISO 15874-1-2004 冷热水装置用塑料管道系统.聚丙烯(PP).第1部分:总则 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 1: General (ISO 15874-1:2003); German version EN ISO 15874-1:2003
DIN EN ISO 15874-2-2004 冷热水装置用塑料管道系统.聚丙烯(PP).第2部分:管道 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 2: Pipes (ISO 15874-2:2003); German version EN ISO 15874-2:2003
DIN EN ISO 15874-3-2004 冷热水装置用塑料管道系统.聚丙烯(PP).第3部分:配件 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 3: Fittings (ISO 15874-3:2003); German version EN ISO 15874-3:2003
DIN EN ISO 15874-5-2004 冷热水装置用塑料管道系统.聚丙烯(PP).第5部分:系统的适应性 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 5: Fitness for purpose of the system (ISO 15874-5:2003); German version EN ISO 15874-5:2003
DIN EN ISO 15875-1-2004 冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第1部分:总则 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 1: General (ISO 15875-1:2003); German version EN ISO 15875-1:2003
DIN EN ISO 15875-2-2004 冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第2部分:管道 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 2: Pipes (ISO 15875-2:2003); German version EN ISO 15875-2:2003
DIN EN ISO 15875-3-2004 冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第3部分:配件 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 3: Fittings (ISO 15875-3:2003); German version EN ISO 15875-3:2003
DIN EN ISO 15875-5-2004 冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第5部分:系统的适应性 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 5: Fitness for purpose of the system (ISO 15875-5:2003); German version EN ISO 15875-5:2003
DIN EN ISO 15876-1-2004 冷热水装置用塑料管道设备.聚丁烯(PB).第1部分:总则 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 1: General (ISO 15876-1:2003); German version EN ISO 15876-1:2003
DIN EN ISO 15876-2-2004 冷热水装置用塑料管道设备.聚丁烯(PB).第2部分:管道 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 2: Pipes (ISO 15876-2:2003); German version EN ISO 15876-2:2003
DIN EN ISO 15876-3-2004 冷热水装置用塑料管道设备.聚丁烯(PB).第3部分:配件 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 3: Fittings (ISO 15876-3:2003); German version EN ISO 15876-3:2003
DIN EN ISO 15876-5-2004 冷热水装置用塑料管道设备.聚丁烯(PB).第5部分:系统的适应性 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 5: Fitness for purpose of the system (ISO 15876-5:2003); German version EN ISO 15876-5:2003
DIN EN ISO 15877-1-2004 冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第1部分:总则 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 1: General (ISO 15877-1:2003); German version EN ISO 15877-1:2003
DIN EN ISO 15877-2-2004 冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第2部分:管道 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 2: Pipes (ISO 15877-2:2003); German version EN ISO 15877-2:2003
DIN EN ISO 15877-3-2004 冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第3部分:配件 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 3: Fittings (ISO 15877-3:2003); German version EN ISO 15877-3:2003
DIN EN ISO 15877-5-2004 冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第5部分:系统的适应性 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 5: Fitness for purpose of the system (ISO 15877-5:2003); German version EN ISO 15877-5:2003
DIN EN ISO 15908-2003 塑料管道系统粘合剂.测定粘合剂热稳定性的试验方法 Adhesives for thermoplastic piping systems – Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002
DIN EN ISO 16871-2003 塑料管道系统.塑料管道和配件.自然风化法 Plastics piping and ducting systems – Plastics pipes and fittings – Method for exposure to direct (natural) weathering (ISO 16871:2003); German version EN ISO 16871:2003
DIN EN ISO 1746-2000 橡胶或塑料软管和管道.弯曲试验 Rubber or plastics hoses and tubing – Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000
DIN EN ISO 21329-2005 石油和天然气工业.管道运输系统.机械连接器的试验过程 Petroleum and natural gas industries – Pipeline transportation systems – Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004
DIN EN ISO 3126-2005 塑料管道系统.塑料部件.尺寸测定 Plastics piping systems – Plastics components – Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005
DIN EN ISO 5136-2003 声学.风机和其他风动设备辐射入管道中的声功率的测定.管道法 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method (ISO 5136:2003); German version EN ISO 5136:2003
DIN EN ISO 5167-1-2004 用园截面管道中插入的压差装置测量流体流量.第1部分:总体规则和要求 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003
DIN EN ISO 5167-2-2004 用插入圆截面管道中的压差装置测量流体流量.第2部分:节流孔板 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Part 2: Orifice plates (ISO 5167-2:2003); German version EN ISO 5167-2:2003
DIN EN ISO 5167-3-2004 用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003
DIN EN ISO 5167-4-2004 用插入圆截面管道中的压差装置测量流体流量.第4部分:文杜利管 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Part 4: Venturi tubes (ISO 5167-4:2003); German versions EN ISO 5167-4:2003
DIN EN ISO 580-2005 塑料管和管道系统.喷射铸造热塑性配件.热效应直观评估法 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings – Methods for visually assessing the effects of heating (ISO 580:2005); German version EN ISO 580:2005
DIN EN ISO 6259-1-2002 热塑管道.拉伸性能的测定.第1部分:通用试验方法(ISO 6259-1:1997); 德文版本 EN ISO 6259-1:2001 Thermoplastics pipes – Determination of tensile properties – Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001
DIN EN ISO 6817-1995 封闭管道中导电液体流量测量.电磁流率计测量法 Measurement of conductive liquid flow in closed conduits – Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995
DIN EN ISO 7235-2004 声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 Acoustics – Laboratory measurement procedures for ducted silencers and air-terminal units – Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2003
DIN EN ISO 7369-2005 管道工程.金属软管和软管组件.词汇 Pipework – Metal hoses and hose assemblies – Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004
DIN EN ISO 8316-1995 封闭管道内液体流量的测量.容积测量箱的液体收集法 (ISO 8316:1987); 德文版本 EN ISO 8316:1995 Measurement of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995
DIN EN ISO 8497-1996 绝热.管道用绝热稳态热传递性能测定 Thermal insulation – Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996
DIN EN ISO 8795-2001 人类生活用水的塑料输水管道系统.偏移评定.塑料管、配件及其接头偏移值测定 Plastics piping systems for the transport of water intended for human consumption – Migration assessment – Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001
DIN EN ISO 9080-2003 塑料管道和导管系统.用外推法测定热塑性塑料管材的长期静液压强度 Plastics piping and ducting systems – Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003); German version EN ISO 9080:2003
DIN EN ISO 9311-1-2005 热塑管道系统用胶粘剂.第1部分:胶粘膜特性的测定 Adhesives for thermoplastic piping systems – Part 1: Determination of film properties (ISO 9311-1:2005); German version EN ISO 9311-1:2005
DIN EN ISO 9311-2-2002 热塑性塑料管道系统用粘合剂.第2部分:剪切强度的测定 (ISO 9311-2:2002); 德文版本 EN ISO 9311-2:2002 Adhesives for thermoplastic piping systems – Part 2: Determination of shear strength (ISO 9311-2:2002); German version EN ISO 9311-2:2002
DIN EN ISO 9311-3-2005 热塑性管道系统用胶粘剂.第3部分:耐内压力性测定的试验方法 Adhesives for thermoplastic piping systems – Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005); German version EN ISO 9311-3:2005
DIN ISO 6412-1-1991 技术制图.管道的简明表示法.第1部分:一般规则和正交表示法; 等同采用 ISO 6412-1:1989 Technical drawings; simplified representation of pipelines; general rules and orthogonal representation; identical with ISO 6412-1:1989
DIN ISO 6412-2-1991 技术制图.管道的简明表示法.第2部分:等角投影; 等同采用 ISO 6412-2:1989 Technical drawings; simplified representation of pipelines; isometric projection; identical with ISO 6412-2:1989
DIN ISO 6412-3-1994 技术制图.管道的简化表示法.第3部分:通风和排水系统终端部件; 等同采用 ISO 6412-3:1993 Technical drawings – Simplified representation of pipelines – Terminal features of ventilation and drainage systems; identical with ISO 6412-3:1993
DIN ISO 6772-1996 航空航天.流体系统.液压软管、管道和连接组件的脉冲试验 (ISO 6772:1988) Aerospace – Fluid systems – Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988)
DIN ISO 6773-1996 航空航天.流体系统.管道和配件的热冲击试验 (ISO 6773:1994) Aerospace – Fluid systems – Thermal shock testing of piping and fittings (ISO 6773:1994)
DIN ISO 8277-1989 船舶制造.信息处理.管道工程.信息传输 Shipbuilding; information processing; pipework; information transfer; identical with ISO 8277:1988
DIN ISO 8575-1998 航空航天.流体系统.液压系统管道 Aerospace – Fluid systems – Hydraulic system tubing (ISO 8575:1990)
DIN ISO 9368-1-1993 用称重法测量封闭式管道中液体的流量.校核装置的规程.静态称重系统 Measurement of liquid flow in closed conduits by the weighing method; procedures for checking installations; static weighing systems; identical with ISO 9368-1:1990
DIN ISO/TS 15874-7-2004 冷热水装置用塑料管道设备.聚丙烯(PP).第7部分:合格评定指南 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2003); German version CEN ISO/TS 15874-7:2003
DIN ISO/TS 15875-7-2004 冷热水装置用塑料管道设备.交联聚乙烯(PE-X).第7部分:合格评定指南 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003); German version CEN ISO/TS 15875-7:2003
DIN ISO/TS 15876-7-2004 冷热水装置用塑料管道设备.聚丁烯(PB).第7部分:合格评定指南 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2003); German version CEN ISO/TS 15876-7:2003
DIN ISO/TS 15877-7-2004 冷热水装置用塑料管道设备.氯化聚氯乙烯(PVC-C).第7部分:合格评定指南 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2003); German version CEN ISO/TS 15877-7:2003
DIN V 16877-2002 电缆导管用聚丙烯管道和配件.尺寸和技术交货条件 Pipes and fittings of polypropylene (PP) for cable ducting – Dimensions and technical delivery conditions
DIN V 16878-2002 埋设导管用聚丙烯管道和配件.尺寸和技术交货条件 Pipes and fittings of polypropylene (PP) for buried ducting – Dimensions and technical delivery conditions
DIN V 4102-21-2002 建筑物材料和建筑物组件的防火性能.第21部分:通风管道防火性能的评估 Fire behaviour of building materials and building components – Part 21: Assessment of the performance of fire resistant air ducts
DIN V 54180-3-1997 无损检测.剪切图示.第3部分:管道检测 Non-destructive testing – Shearography – Part 3: Testing of pipelines
DIN V 65900-14-1998 航空航天系列.液体或气体条件下管道的设计和结构.设施的刚性管线 Aerospace series – Design and construction of pipeline for fluids in liquid or Gaseous condition – Rigid lines, installation (AECMA Technical Report TR 2674:1997)
DIN V 65900-6-1995 航空航天系列.钛合金管道联轴节、松动式法兰和密封件.总装建议 (AECMA 技术报告 TR 4053:1994) Aerospace series – Pipe couplings, loose flanges and seals, in titanium alloy Assembly recommendations (AECMA Technical Report TR 4053:1994)
DIN V 65900-7-1995 航空航天系列.钛合金60度球形管道联轴节.总装建议 (AECMA 技术报告 TR 4052:1995) Aerospace series – Pipe couplings 60 °, spherical, in titanium alloy – Assembly recommendations (AECMA Technical Report TR 4052:1995)
DIN V 86002-2000 船舶和海上技术.管道设备用符合DIN和DIN EN标准的铜合金的比较 Ships and marine technology – Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment
DIN V ENV 1046-2002 塑料管道系统.输送水或污水用建筑结构外部系统.地上和地下安装惯例 Plastics piping and ducting systems – Systems outside building structures for the conveyance of water or sewage – Practices for installation above and below ground; German version ENV 1046:2001
DIN V ENV 12108-2001 塑料管道系统.建筑物内人用冷热水压力管道安装指南 Plastics piping systems – Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption; German version ENV 12108:2001
DIN V ENV 1329-2-2001 建筑物内渣土和废物倾倒用塑料管道系统(低和高温).未增塑聚氯乙烯.第2部分:合格评定导则 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for the assessment of conformity; German version ENV 1329-2:2001
DIN V ENV 13801-2001 建筑结构内(低温和高温)渣土和废弃物排放塑料管道系统.热塑管.推荐安装惯例 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Thermoplastics – Recommended practice for installation; German version ENV 13801:2001
DIN V ENV 1401-2-2000 非压力地下排水和污水管道用塑料管道系统.硬聚氯乙烯(PVC-U).第2部分:一致性评估指南 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for assessment of conformity; German version ENV 1401-2:2000
DIN V ENV 1401-3-2001 无压地下排水和排污塑料管道系统.非增塑聚氯乙烯(PVC-U).第3部分:安装导则 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U) – Part 3: Guidance for installation; German version ENV 1401-3:2001
DIN V ENV 1451-2-2001 建筑物内渣土和废物倾倒用塑料管道系统(低温和高温).聚丙烯.第2部分:合格评定导则 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene (PP) – Part 2: Guidance for the assessment of conformity; German version ENV 1451-2:2001
DIN V ENV 1452-6-2002 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第6部分:安装指南: 德文版本 ENV 1452-6:2001 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 6: Guidance for installation; German version ENV 1452-6:2001
DIN V ENV 1452-7-2001 供水塑料管道系统.未增塑聚氯乙烯(PVC-U).第7部分:合格评定指南 Plastics piping systems for water supply – Unplasticized poly(vinyl chloride) (PVC-U) – Part 7: Guidance for the assessment of conformity; German version ENV 1452-7:2000
DIN V ENV 1453-2-2001 清除建筑物内部尘土和废物(低温和高温)用带结构管壁的塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:合格评 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for the assessment of conformity; German version ENV 1453-2:2000
DIN V ENV 1455-2-2001 建筑结构中(低温和高温)渣土和废物排放用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物(ABS).第2部分:合格评定 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Acrylonitrile-butadiene-styrene (ABS) – Part 2: Guidance for the assessment of conformity; German version ENV 1455-2:2001
DIN V ENV 1519-2-2001 建筑结构中(低温和高温)渣土和废物排放用塑料管道系统.聚乙烯(PE).第2部分:合格评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polyethylene (PE) – Part 2: Guidance for the assessment of conformity; German version ENV 1519-2:2001
DIN V ENV 1565-2-2001 建筑结构中(低温和高温)渣土和废物排放用塑料管道系统.苯乙烯共聚体混合物(SAN+PVC).第2部分:合格评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Styrene copolymer blends (SAN+PVC) – Part 2: Guidance for the assessment of conformity; German version ENV 1565-2:2001
DIN V ENV 1566-2-2001 建筑结构中(低温和高温)渣土和废物排放用塑料管道系统.氯化聚氯乙烯(PVC-C).第2部分:合格评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Chlorinated poly (vinyl chloride) (PVC-C) – Part 2: Guidance for the assessment of conformity; German version ENV 1566-2:2001
DIN V ENV 1852-2-2000 非压力地下排水和污水用塑料管道系统.聚丙烯.第2部分:一致性评估指南 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Part 2: Guidance for the assessment of conformity; German version ENV 1852-2:2000
DIN V ENV 1993-4-3-2002 欧洲法规3:钢结构设计.第4-3部分:筒仓、槽罐和管道.管道 Eurocode 3: Design of steel structures – Part 4-3: Silos, tanks and pipelines; Pipelines; German version ENV 1993-4-3:1999
DIN V ENV 737-6-2003 医用气体管道系统.第6部分:医用压缩气体和真空终端装置用探针的尺寸和定位 Medical gas pipeline systems – Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum; German version ENV 737-6:2003
DIN V ENV 852-2002 生活用水塑料输水管道系统.移位评定.实验室取得的移位值说明指南 Plastics piping systems for the transport of water intended for human consumption – Migration assessment – Guidance on the interpretation of laboratory derived migration values; German version ENV 852:2001
DIN VDE 0634-2-1987 地下电器设备用管道、线槽及其附件 Ducting and trunking and their accessories for underfloor electrical installations

Related News

  • * 暂无相关文章
العربيةБългарски简体中文繁體中文DanskNederlandsEnglishFrançaisDeutschBahasa IndonesiaItaliano日本語한국어LatinPortuguêsРусскийEspañolதமிழ்ไทยTürkçe