MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 – NPS 24. Except with regard to the outside diameter at the bevel.
What is F44?
F44 (also called EN 1.4547, UNS S31254, 254 SMO and SS2378) is a high alloyed austenitic stainless steel with exceptionell corrosion resistance. is a very high end austenitic stainless steel. It is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with strength that is twice that of the stainless steel 300 series. The 6Mo super austenitic steel combines moderate tensile strength and high ductility with excellent corrosion resistance in seawater and variety of industrial environment. Typically the alloy has PREN of 42 – 44, which ensure that the resistance to pitting corrosion is high and it also has a hight resistance to crevice corrosion. Welding Welding of stainless steel grade 254 SMO requires filler material without which it results in poor strength properties. Filler metals such as AWS A5.14 ERNiCrMo-3, and alloy 625 are recommended. Electrodes used in the process, have to match with AWS A5.11 ENiCrMo-12. Annealing Annealing of this material should be performed at 1149-1204°C (2100-2200°F), which should be followed by a water quench. Hot Working Forging, upsetting and other operations relating to this material can be performed at 982 – 1149°C (1800 – 2100°F). It is recommended that temperatures do not exceed this range as it would result in scaling and reduction in the workability of the material. To re-attain maximum corrosion resistant properties, it is advisable to perform post-process annealing. Cold Working Cold working can be carried out using all the traditional methods; however the process would be tough due to its high work hardening rate. The result will provide the material with increased strength and toughness. Hardening Stainless steel grade 254 SMO does not respond to heat treatment. Hardening is possible only through cold reduction.
5 based on 1 votes
MSS SP-43 ASTM A403 UNS S31254 Seamless Stub End 8" SCH20
Request a quote
Products Related to MSS SP-43 ASTM A403 UNS S31254 Seamless Stub End 8″ SCH20